Build Your Own Arcade Controls Forum
Main => Software Forum => Topic started by: jackiabu on August 12, 2014, 11:26:48 am
-
Hi
I have two guns, from Amitrack and both calibrations and work well.
Recently one of them dont shoot all the time :dizzy: I mean once he shoot and once he doesn't firing at all. the other gun is working fine.
i allso try in my other arcade machine whit new Led Bar, but no success...
-
Is this the second gun and happening during 2 player gameplay? If so, a lot of us are experiencing this problem.
I recently tried to plug the guns directly into the USB ports on the PC instead of using a hub, but I have not had the chance to test to see if it corrected it.
-
Is this the second gun and happening during 2 player gameplay? If so, a lot of us are experiencing this problem.
I recently tried to plug the guns directly into the USB ports on the PC instead of using a hub, but I have not had the chance to test to see if it corrected it.
no its happening during 1 player game. but if i switch and plug the second gun only. its work fine.
-
I just change in mame the button to other button in the gun. and now when I'am firing there is no " delay or stopping firing" maybe there is a problem with the firing button :dunno
(http://i.imgur.com/MZRHGvy.jpg)
-
i email andy from Ultimarc, he say i will send the gun toh him. and he will can repair it :)
i just cruises, is any one replace a micro switch on aimtrack gun? if so please give me some link.
-
it is possible to micro switch on aimtrack guns. i just dont remember where i see it before :-\ Try googling it.
-
This has happened to me aswell,but it only happens right after i calibrate the guns in the aimtrak utility.when i go into a game,doesnt matter if its pc ,model 2,mame whatever,the gun will shoot really slow,like theres a read delay or something.usually a reboot fixes the problem.Maybe Andy could verify if the aimtrak utility has a bug in it or something.Are trigger presses during the calibration process delayed or governed in some way so you dont accidentally skip a step while calibrating?
-
This has happened to me aswell,but it only happens right after i calibrate the guns in the aimtrak utility.when i go into a game,doesnt matter if its pc ,model 2,mame whatever,the gun will shoot really slow,like theres a read delay or something.usually a reboot fixes the problem.Maybe Andy could verify if the aimtrak utility has a bug in it or something.Are trigger presses during the calibration process delayed or governed in some way so you dont accidentally skip a step while calibrating?
I dont skip any step from the calibration. :-\
-
What if you guys leave them always plugged in? I'm just curious if that would eliminate problems. I don't have any yet, but when I get them, I plan on keeping them plugged in "forever".