Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: DOC on December 10, 2003, 02:41:28 am
-
on the part side of my Jamma Connector there are "Wires" of course :) * but!! * on the other side of the connection the wires dosen't match in color - this may be cause of it's a home created CP circuit... :)
now, question is : would you rewire everything and make wire color match?
-
I would, but only because building wiring harnesses is part of what I do for a living. ;) Several people have wired everything using one color, and to be honest their stuff seems to work just fine.
If it works, I'd suggest leaving it alone and concentrating on the stuff that doesn't. :)
-
yes yes :).. of course it'll work..!! but it's a lil'confusing if u know :)...!! * hehe 'i'll just let it be as it is then *
i'll soon start building my own CP... hope you ready to support me if something goes wrong, " that be the wirepart of course ;) "
OFF TOPIC " btw - the manual you gave me helped me out very very much * i've been able to identify everything in my cab now, and got no problems understanding anything of it :).. in fact the electronics in a cab is very simple...!!"
-
link to the manual? i need to familiarize myself with the wiring also
-
Doc's using a Neo Geo cab, I gave him a link to a Neo Geo operator's manual at arcadedocs.
http://www.arcadedocs.com/vidmanuals/N/neogeo_mv1fz_manual.pdf (http://www.arcadedocs.com/vidmanuals/N/neogeo_mv1fz_manual.pdf)
-
ah ok, maybe i can find a diagram for my machine there. ( street fighter 3)
-
damn aparrently there is no main site for arcadedocs.com... hmmm
-
Try KLOV, if the manual is available there's a good chance they have a link to it.
-
Klov...!! " go for it ;) "