Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: sollyscomputers on August 07, 2014, 04:33:04 pm

Title: How to power monitor with 60 in 1
Post by: sollyscomputers on August 07, 2014, 04:33:04 pm

Hi people,
Am about to do the wiring in my cocktail cab 60 in 1 JAMMA with the standard power supply that comes with the complete kit.  My question, do I connect the monitor from the AC connectors of the power supply?  Or is there another way that I should be doing it?  I think it's OK this way but thought I'd check

Cheers


John

Title: Re: How to power monitor with 60 in 1
Post by: grantspain on August 07, 2014, 05:00:29 pm

depends on the monitor model number,most run direct from mains but some require isolation transformers

Title: Re: How to power monitor with 60 in 1
Post by: sollyscomputers on August 07, 2014, 06:31:01 pm

Just a Dell 19" LCD

Title: Re: How to power monitor with 60 in 1
Post by: Slippyblade on August 07, 2014, 06:45:29 pm

Just drop a power strip inside the cabinet.  Plug the LCD into it and then plug the PS for the 60-in-1 into as well.

Title: Re: How to power monitor with 60 in 1
Post by: sollyscomputers on August 07, 2014, 06:58:16 pm

Yeah, keep it simple