Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: jugger18 on July 08, 2014, 10:53:01 pm

Title: Xin mo problems
Post by: jugger18 on July 08, 2014, 10:53:01 pm

I picked up a xin mo NIB off the forums.  Got my test box (a cardboard box) wired up.  Daisy chained the ground to common, and all switches to NO.  Plugged it into PC, Xin mo is recognized.  When I go into test it does not recognize any inputs, same when I try to calibrate.  Any ideas?

Title: Re: Xin mo problems
Post by: thomas_surles on July 09, 2014, 01:24:39 am

Hmm I had the same problem once but it fixed itself. Though I don't use mine as a gamepad I use joy to key

Title: Re: Xin mo problems
Post by: jugger18 on July 09, 2014, 10:11:39 am

It was possibly an ID10T error.  Moved the ground harness to the plugs on P2 side and all was well.

Title: Re: Xin mo problems
Post by: thomas_surles on July 09, 2014, 11:18:13 am

weird I also had a problem with mine wherw it wouldnt work on a certain usb port anymore.