Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: bimm25e on June 30, 2014, 06:40:45 pm

Title: Happ Power Pro Molex ?
Post by: bimm25e on June 30, 2014, 06:40:45 pm

So Just bought a new HAPP Power  Pro 20A power supply

http://universalgamecabinetsandparts.com/wp-content/uploads/2013/05/power-supply.jpg (http://universalgamecabinetsandparts.com/wp-content/uploads/2013/05/power-supply.jpg)

And I'd like to buy the appropriate molex connectors to hookup to my JAMMA harness.  Anyone know what product numbers Im looking for on MOUSER.com  or even better, want to sell me one of each? :)

Title: Re: Happ Power Pro Molex ?
Post by: Nephasth on June 30, 2014, 06:51:59 pm

Bob  Roberts

Title: Re: Happ Power Pro Molex ?
Post by: Ken Layton on July 01, 2014, 12:09:35 am

It looks like you need the male connector housings and male crimp terminals.

Mouser # 538-03-09-2091 Housing, .093" Male, 9 pin

Mouser # 538-03-09-2031 Housing, .093", male, 3 pin

Mouser # 538-02-09-2103 Male crimp terminals, .093"

If you also want to get female halves, here are the numbers:

538-03-09-1091

538-03-09-1081

538-02-09-1104

Title: Re: Happ Power Pro Molex ?
Post by: bimm25e on July 01, 2014, 08:53:05 am

Quote from: Ken Layton on July 01, 2014, 12:09:35 am

It looks like you need the male connector housings and male crimp terminals.

Mouser # 538-03-09-2091 Housing, .093" Male, 9 pin

Mouser # 538-03-09-2031 Housing, .093", male, 3 pin

Mouser # 538-02-09-2103 Male crimp terminals, .093"

If you also want to get female halves, here are the numbers:

538-03-09-1091

538-03-09-1081

538-02-09-1104

thank you VERY MUCH!!

Title: Re: Happ Power Pro Molex ?
Post by: mgb on July 01, 2014, 10:11:24 am

You can also find those connectors at Radio shack. Just make sure they're the correct size

Title: Re: Happ Power Pro Molex ?
Post by: Ken Layton on July 01, 2014, 11:21:57 am

Radio Shack does not have the three pin connectors, but they do have the 9 pin ones.