Build Your Own Arcade Controls Forum
Main => Everything Else => Meet-Up => Topic started by: Generic Eric on April 08, 2014, 09:07:49 pm
-
http://www.meetup.com/fargo-3d-printing-makers-and-designers (http://www.meetup.com/fargo-3d-printing-makers-and-designers)
https://www.facebook.com/meldworkshop (https://www.facebook.com/meldworkshop)
Fargo MELD just had an arcade cabinet delivered. We're going to use this for a group project and turn it into a MAME cabinet. If you're interested in joining the project, checkout the FM Makers meetup group.
(https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-frc3/t1.0-9/p320x320/1506581_476459525787823_2275147358351498653_n.jpg)
I'm not affiliated with the group, nor am I close enough to visit (over 2 hour drive), but just in case there was anyone from Fargo on the board, I thought I'd post it.
-
Jennifer lives in this area, However, I'm quite busy, joining a workgroup isn't in the cards right now... I am quite interested in what it is your going to try, Lazercut panels and parts from an original template??
-
I'm not affiliated with the group, nor am I close enough to visit, but just in case there was anyone from Fargo on the board, I thought I'd post it.
I'm gonna edit the original post a bit.
-
Apparently there is a "create a meld in your area button" that may not be so bad... The hackers are playing with aruendo boards, a rom dumping class so-to speak.