Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: Sarver Systems on March 28, 2014, 12:11:38 am

Title: Help me identify this part, 20EZ monitor
Post by: Sarver Systems on March 28, 2014, 12:11:38 am

I am recapping the video and audio board on a Sanyo 20EZ.

The audio board has a part labeled as R383. However, it isn't a resistor. The value is INP339.

Can someone tell me what this part is, and where to order one?

Title: Re: Help me identify this part, 20EZ monitor
Post by: Ken Layton on March 28, 2014, 12:19:01 am

Yes that is indeed a resistor. It's 39 ohms @ a quarter watt.

Here's where to buy it:

http://www.twistywristarcade.com/fusible-resistors/969-nintendo-audio-amp-r383-fusible-resistor.html (http://www.twistywristarcade.com/fusible-resistors/969-nintendo-audio-amp-r383-fusible-resistor.html)

Title: Re: Help me identify this part, 20EZ monitor
Post by: Sarver Systems on March 28, 2014, 12:22:26 am

Can I substitute a plain ole 39ohm, 1/4W resistor, or does it HAVE to be fusible? I've got plenty of resistors that I can throw in, but they're plain resistors.

Title: Re: Help me identify this part, 20EZ monitor
Post by: Ken Layton on March 28, 2014, 12:35:02 am

I've been using plain old 39 ohm quarter watt resistors on these boards for at least 20 years with no problems.

Title: Re: Help me identify this part, 20EZ monitor
Post by: Sarver Systems on March 28, 2014, 12:43:40 am

Excellent! Thanks for the info!

Title: Re: Help me identify this part, 20EZ monitor
Post by: Sarver Systems on March 30, 2014, 11:02:20 pm

Thanks for your help Ken. I replaced that part with a 38ohm resistor, and all is well!

Title: Re: Help me identify this part, 20EZ monitor
Post by: Ken Layton on March 31, 2014, 01:01:30 am

Glad you got it running!

 :applaud: