Build Your Own Arcade Controls Forum

Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: Caparo8bit on February 28, 2014, 11:39:27 pm

Title: This works good?
Post by: Caparo8bit on February 28, 2014, 11:39:27 pm

http://www.ebay.com/itm/New-Zero-Delay-Arcade-USB-Encoder-PC-to-joystick-for-MAME-Fight-Stick-Controls-/171017609206?pt=LH_DefaultDomain_0&hash=item27d1719ff6 (http://www.ebay.com/itm/New-Zero-Delay-Arcade-USB-Encoder-PC-to-joystick-for-MAME-Fight-Stick-Controls-/171017609206?pt=LH_DefaultDomain_0&hash=item27d1719ff6)

Title: Re: This works good?
Post by: Mr_Numbers on February 28, 2014, 11:54:31 pm

This works good?  *well*

Title: Re: This works good?
Post by: Le Chuck on March 01, 2014, 09:09:08 am

yeah

Title: Re: This works good?
Post by: Caparo8bit on March 01, 2014, 08:10:24 pm

Quote from: Le Chuck on March 01, 2014, 09:09:08 am

yeah

thanks

Title: Re: This works good?
Post by: JDFan on March 01, 2014, 08:26:01 pm

Works fine for a single player setup -- It has 16 inputs and shows up in windows as a gamepad with 12 buttons so works fine as long as you do not plan on having too many buttons (ie. I used one in my bartop for a dual joystick single player setup and by sharing buttons 3-6 with the second joystick was able to do 6 admin buttons (1 and 2 player coin and start - Pause - Esc.) 6 player buttons (4 sharing inputs with the 2nd joystick since both are not used at the same time) and 2 joysticks for playing Robotron and Smash TV, etc.. 

Title: Re: This works good?
Post by: lilshawn on March 05, 2014, 03:10:16 pm

the supplied wires of that kit won't fit a standard cherry switch. they are for the smaller japanese style joystick connectors.

(unless you are just using this as an example)  :dunno