The NEW Build Your Own Arcade Controls

Main => Buy/Sell/Trade - non-retail => Topic started by: hyper x on February 26, 2014, 11:36:21 am

Title: Full Part out of Williams Stellar Wars (1979) Pinball Machine (Dutchess , NY)
Post by: hyper x on February 26, 2014, 11:36:21 am
Just bought a 1979 Stellar Wars Pinball machine that I am parting out due to turning it into a virtual machine.  I was looking for this particular cabinet size so I can fit the 50" led I just picked up for it.  I do have a real pinball machine in my home arcade and I really did not want to kill a working machine but the cabinet was in rough shape and I really don't need another restore/project.

I tested the machine before I bought it and everything plays and works well minus the middle drop down targets.  They reset sometimes so I believe the actuator needs to be replaced. Playfield is in okay condition as you can see in the close up photos and will need some TLC to bring it back for a full restore. Back glass is in excellent shape.

More pics are here:
https://imageshack.com/a/LB1q/1

Looking to get rid of it all for one lump price in Dutchess/Westchester. Not looking to get rich here and just want the stuff out of my garage.

PM/email for high res photos links if the link I provide does not provide the detail you want for zooming.

Mike
Title: Re: Full Part out of Williams Stellar Wars (1979) Pinball Machine (Dutchess , NY)
Post by: spoot on February 26, 2014, 11:43:50 am
1) What kinda price you looking for?
2) Would you consider shipping?
Title: Re: Full Part out of Williams Stellar Wars (1979) Pinball Machine (Dutchess , NY)
Post by: hyper x on March 03, 2014, 12:17:46 pm
Hi,

Depending on where the shipping is and what you want.  I have this listed on pinside as well and all of the boards are spoken for with the wiring harness.  I was really trying to get rid of the playfield as a whole but if I end up parting out someone already has dibs on the plastic artwork inlays.  Really not looking to make a fortune here.  Just shoot me over a price and what you want.  If you want the entire playfield it will be heavy so I would have to see exact shipping at ups center.

Just let me know.  For some reason I wasn't sent a email letting me know of a new post.  Sorry for the delay.  Can also pm me and I'll give you my cell if you wish to talk in person.

Mike
Title: Re: Full Part out of Williams Stellar Wars (1979) Pinball Machine (Dutchess , NY)
Post by: hyper x on March 05, 2014, 09:58:46 am
All the circuit boards have been sold.  Still have the entire playfield with inserts, solenoids, wiring etc, coin mechanism, backglass (artwork), the backglass board (has all the sockets and solder joints for bulbs), Tilt mechanism and other small parts.  Thanks.

Mike