Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Yourname942 on February 22, 2014, 09:07:47 pm

Title: Question Regarding WinIpac controls
Post by: Yourname942 on February 22, 2014, 09:07:47 pm

Does anyone know how to remap the wiipac controls so that player 1 key is not mapped to L Ctrl?

Thank you

Title: Re: Question Regarding WinIpac controls
Post by: PL1 on February 22, 2014, 10:05:14 pm

Are you asking how to change the "1 SW 1" setting (Player 1, Button 1) in WinIPAC (http://www.ultimarc.com/winipac_ipd.html) or how to program the board?


Scott

Title: Re: Question Regarding WinIpac controls
Post by: Yourname942 on February 22, 2014, 10:23:46 pm

yes I believe it is the 1 SW1 setting that I am trying to change (the button on the control panel is mapped to the correct button, but I don't want that button to be the Left Ctrl button.

Title: Re: Question Regarding WinIpac controls
Post by: PL1 on February 22, 2014, 10:41:20 pm

From the link in my earlier post: (1/2 way down the page under "Keycode Mode")

Quote

There are two ways to assign a keycode to each I-PAC input. . .
[table view] To assign, click on the input required, then press a key. . .
[Panel View] click on a button on the picture of the panel and assign a keycode to it!

Scott