Build Your Own Arcade Controls Forum
Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: Caparo8bit on January 27, 2014, 02:51:04 pm
-
My control panel layout has 6 LED buttons, is there a way to set LED to turn buttons that will b in use like if i play nes games only two shld come one...... or six for SF .
-
My control panel layout has 6 LED buttons, is there a way to set LED to turn buttons that will b in use like if i play nes games only two shld come one...... or six for SF .
Research "LED Blinky".
-
My control panel layout has 6 LED buttons, is there a way to set LED to turn buttons that will b in use like if i play nes games only two shld come one...... or six for SF .
Research "LED Blinky".
my buttons already come with LED so if i want to do this do i need to add resistors to all????? planing to use LEDwiz with LEDblinky
-
My control panel layout has 6 LED buttons, is there a way to set LED to turn buttons that will b in use like if i play nes games only two shld come one...... or six for SF .
Research "LED Blinky".
my buttons already come with LED so if i want to do this do i need to add resistors to all????? planing to use LEDwiz with LEDblinky
If they're 5v LEDs, then no. I don't think so.
-
:o this is what i have .. i think they r ready
(https://scontent-b-sjc.xx.fbcdn.net/hphotos-prn1/v/t34/1013750_786437594703976_1734107086_n.jpg?oh=a0cf2f83a600bc08a99d64e73f039cb9&oe=52E865F6)
-
My control panel layout has 6 LED buttons, is there a way to set LED to turn buttons that will b in use like if i play nes games only two shld come one...... or six for SF .
Research "LED Blinky".
thanks Yot now im going to order my LED wiz and start playing arround with
-
You can believe yotsuya, he has lots of rep, so it must mean he knows what he's talking about... :-\ :D
-
I've also hooked up two LED-Wizzes, so there's that.... >:D
-
And, whoa, what happened to that button? Did you pull it apart?
But yeah, you can see the resistor. You should be fine. Just following the LED Wiz wiring diagram.
-
And, whoa, what happened to that button? Did you pull it apart?
But yeah, you can see the resistor. You should be fine. Just following the LED Wiz wiring diagram.
this kind of buttons r twist and go . Just put LED back in black socket then twist in botton .
-
Yeah, I've used those before. You should be good to go, bro.
-
LDEWiz on his way now I'm building a icade for 2 players is there any small buttons ( diameter) don't like sanwa since they r clip on.
-
The smaller sanwa's (used mainly for start-buttons) come as screw-in buttons as well, fyi.
-
The smaller sanwa's (used mainly for start-buttons) come as screw-in buttons as well, fyi.
thanks
-
In case you're interested, here's a quick comparison shot of a 24mm screw in Sanwa (orange) compared to a 30mm snap in.
-
In case you're interested, here's a quick comparison shot of a 24mm screw in Sanwa (orange) compared to a 30mm snap in.
thanks
-
Keep in mind with the Sanwa 24mm, they won't go in 3/4".
They're not long enough.
-
(http://i.imgur.com/YQTANqe.gif)
This ---smurfing--- graphic creeps me out, bro. >:D
-
(http://i.imgur.com/YQTANqe.gif)
This ---smurfing--- graphic creeps me out, bro. >:D
thats my face gif (http://i.imgur.com/NLUaGzq.gif).............. hey (http://forum.arcadecontrols.com/avatars/user/avatar_24055.jpg)Help me with LED blinky having error running MAME. Please
-
What's the issue, compa?
-
What's the issue, compa?
(https://scontent-b-sjc.xx.fbcdn.net/hphotos-prn1/v/t35/1049026_790593037621765_1738180979_o.jpg?oh=334abfaf3b5d6959ab73b33930cfb30f&oe=52F31552)
-
this is my setup and errors
http://forum.arcadecontrols.com/index.php/topic,137556.0.html (http://forum.arcadecontrols.com/index.php/topic,137556.0.html)