Build Your Own Arcade Controls Forum

Main => Software Forum => Topic started by: tylerwerrin on January 12, 2014, 03:45:29 am

Title: LED WIZ & LED Blinky -- Only one device being recognized at a time
Post by: tylerwerrin on January 12, 2014, 03:45:29 am

Hi guys,

I recently finished wiring up my two LED Wiz modules -- one for each set of 8 buttons for each player. When I plug my two LED wiz modules into my computer, I can only get one to register within LED Blinky at a time (the first one plugged in) When I go to "Simple LED Test" i can go through all the buttons and all of their colors, but only one set of buttons at a time. In addition to this, only one LED Wiz device is shown on the menu even when both are connected.

I checked my terminals and I am getting a steady 5V at all wires. I am powering the two LED wiz's from an ATX Power supply.

It looks like LED Blinky can support many devices -- yet if I try to choose any of the other LED Wiz devices in "GenLEDBlinkyInputMap" no buttons are registered. The only slot that functions is LED Wiz device 1.

What am I doing wrong? How can I get both devices to register?

Thanks!

Tyler