Build Your Own Arcade Controls Forum
Main => Software Forum => Topic started by: dreamfreak on November 26, 2003, 08:04:21 am
-
hi,
I love the arkanoid 1 cab with one paddle.
is there a way to get a solution with works under mame ?
thx
-
I'm not sure the question...
yes it works with a paddle / spinner. Oscar at http://www.oscarcontrols.com (http://www.oscarcontrols.com) sells a few... These hook up to a single mouse axis and works great.
but take note...
the original arkanoid used a weightless spinner (when you spin it and let go...it would stop) and most of the people here like weighted spinners (like tempest that when you let go it continues for a bit).
You can find original arkanoid spinners on ebay for about 20 - 25 bucks... (and you need a cabinet or box to hook it up to) then you would need to hack it. You also wont know how clean it will be and might find the gears are going bad... many ebay items are what others replaced because it was so old... have to take that in mind.
-
hi lilwolf,
thanx for your answer
I found the SlikStik Tornado Spinner from www.slikstik.com
have someone tried it with arkanoid ?
is it weihgtless ?
do you now how I can hack it for pc ? with a usb mouse hack ?
thx
-
The slikstick spinner is the exact opposite of an Arkanoid spinner, it spins FOREVER.
You don't have to hack it for PC though, it plugs right in.
www.oscarcontrols.com sells spinners too.
-
thank you
do you know how I can hack a original spinner from an old arkanoid cab for pc ?
do you think is it ok to play arkanoid with the oscarcontrols or slipstik spinner
-
An original Arkanoid spinner will hook up with either an Oscarcontrols.com mouse hack or an optipac from www.ultimarc.com
But really, the original Arkanoid spinner was one of the worst ones. The Tornado spinner or one of oscars spinners will be just fine.