Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: stigzler on November 23, 2013, 06:52:57 pm

Title: Anti-glare plexi with Aimtrak LED strip
Post by: stigzler on November 23, 2013, 06:52:57 pm

I have my Aimtrak LED strip mounted above my monitor in the wooden bezel. Can I put anti-glare plexi over this, or would it have to be clear plexi??

Thanks

Title: Re: Anti-glare plexi with Aimtrak LED strip
Post by: stigzler on November 24, 2013, 01:13:08 pm

Never mind. I'll email ultimarc directly.

Title: Re: Anti-glare plexi with Aimtrak LED strip
Post by: ABACABB on November 25, 2013, 02:18:38 pm

I placed a piece of "smoke" tinted plexi over mine but just took off the plastic tinted cover of the LED strip.  It worked just fine

Title: Re: Anti-glare plexi with Aimtrak LED strip
Post by: stigzler on November 25, 2013, 03:46:51 pm

Cheers ABACABB. I'm guessing you were using the full unit? mine's just the pcb and leds. Sounding like this might work - just hoping any anti-glare doesn't diffuse the LEDs too much. :)

Title: Re: Anti-glare plexi with Aimtrak LED strip
Post by: ABACABB on November 25, 2013, 06:45:27 pm

Yes, I am using the full unit with the tinted plastic over the LEDs. If you don't have that already, I'm sure you'll be just fine