Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: nadcraker on November 14, 2013, 04:51:49 pm

Title: I think I have a WG K7000, but the anode wire is black?
Post by: nadcraker on November 14, 2013, 04:51:49 pm

I recently purchased an NBA JAM cab that used to be a TMNT cab (that's what I was told, anyways), and I am trying to adjust the monitor.

I've looked at the link here and I think this is my monitor: http://arcadecontrols.com/BBBB/7000.html (http://arcadecontrols.com/BBBB/7000.html)

However, my anode wire is black. I've never seen that in my internet research.

Pictures of my monitor are attached.  They aren't the best, but hopefully they help.

Title: Re: I think I have a WG K7000, but the anode wire is black?
Post by: Ken Layton on November 14, 2013, 08:19:23 pm

You have this mounted to a K7000 frame:

http://homearcade.org/BBBB/monitor78.html (http://homearcade.org/BBBB/monitor78.html)

Title: Re: I think I have a WG K7000, but the anode wire is black?
Post by: nadcraker on November 15, 2013, 05:02:21 pm

Quote from: Ken Layton on November 14, 2013, 08:19:23 pm

You have this mounted to a K7000 frame:

http://homearcade.org/BBBB/monitor78.html (http://homearcade.org/BBBB/monitor78.html)

Ahhh, OK.  Is that common? Good? Bad? Ugly?  It looks like I have a Sharp Image chassis on a K7000 frame hooked to a Zenith tube.

Title: Re: I think I have a WG K7000, but the anode wire is black?
Post by: buffett on January 14, 2014, 12:36:35 am

if it works let it work.

if it breaks put a K7000 back on that tube.

if you need one contact me threw my site.
thearcadebuffett.com

Peace
Buffett