The NEW Build Your Own Arcade Controls

Main => Monitor/Video Forum => Topic started by: 05SRT4 on November 13, 2013, 06:11:02 am

Title: Adapter/Harness Rush 2049
Post by: 05SRT4 on November 13, 2013, 06:11:02 am

Hello Gents,

I finally received my new Monitor for my Rush 2049 cab, I ordered it from  Xgaming  (http://www.xgaming.com/store/arcade-parts-and-accessories/product/weiya-29-flat-screen-crt-arcade-monitor/) (note that it is a tri mode not a svga) I received everything and got it installed. The power cable is was easy just a 3 hole molex connection. For the video it came with a d sub cable but the cab uses a 6 pin molex 3x3 type of connection. Do I need an adapter or do I need to splice in some wires?

I checked the game board and didn't see any other d sub outputs.

Thanks

Title: Re: Adapter/Harness Rush 2049
Post by: 05SRT4 on November 13, 2013, 12:50:18 pm

Never mind I figured it out.

I had to swap the green and black wires on the power, then I unplugged the VGA cable from the video board and used that. All works and the new monitor looks amazing.