Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: matt4949 on November 07, 2013, 07:08:19 pm

Title: MATCHING T-MOLDING & BUTTONS
Post by: matt4949 on November 07, 2013, 07:08:19 pm
Does anyone know if this T-molding
http://www.ebay.com/itm/20-FT-3-4-INCH-Light-Blue-T-Molding-/251350153833?pt=LH_DefaultDomain_0&hash=item3a85a2fa69 (http://www.ebay.com/itm/20-FT-3-4-INCH-Light-Blue-T-Molding-/251350153833?pt=LH_DefaultDomain_0&hash=item3a85a2fa69)
matches in color this blue button and joystick fom Happ
Title: Re: MATCHING T-MOLDING & BUTTONS
Post by: zanna5910 on November 08, 2013, 12:39:37 pm
Match or close enough?  It look lighter to me, but there are so many variables in pictures.

If you truly want to know if it matches, ask Happ and Molding guys what the PMS or RGB color is.
Title: Re: MATCHING T-MOLDING & BUTTONS
Post by: CaptainMarvel on November 08, 2013, 01:03:13 pm
Aren't there t-molding suppliers from whom you can request a sample?
Title: Re: MATCHING T-MOLDING & BUTTONS
Post by: matt4949 on November 08, 2013, 04:00:03 pm
Quote from: CaptainMarvel on November 08, 2013, 01:03:13 pm
Aren't there t-molding suppliers from whom you can request a sample?
Yeah and I really should. I'm at a spot where it's time to order buttons joystick encoder and t molding and I'm too impatient to wait on samples even though I know I should.
Title: Re: MATCHING T-MOLDING & BUTTONS
Post by: CoryBee on November 08, 2013, 04:46:33 pm
if you get this setup in your picture

http://www.ebay.com/itm/2-Joysticks-and-14-Buttons-Arcade-Multicade-MAME-Jamma-/110934987870?pt=LH_DefaultDomain_0&hash=item19d43d945e (http://www.ebay.com/itm/2-Joysticks-and-14-Buttons-Arcade-Multicade-MAME-Jamma-/110934987870?pt=LH_DefaultDomain_0&hash=item19d43d945e)

then request the white microswitches, the black ones are crap "imo"
Title: Re: MATCHING T-MOLDING & BUTTONS
Post by: matt4949 on November 08, 2013, 06:45:48 pm
thx cory
Title: Re: MATCHING T-MOLDING & BUTTONS
Post by: CoryBee on November 09, 2013, 06:39:14 am
Quote from: matt4949 on November 08, 2013, 06:45:48 pm
thx cory

No problem. I actually stopped using him (have ordered a ton from him, good guy) as I started buying this to save money on the encoder.

http://www.ebay.com/itm/221281135290?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 (http://www.ebay.com/itm/221281135290?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649)

$60 is not so bad for everything you need for a 2 player control panel

 :cheers:
Title: Re: MATCHING T-MOLDING & BUTTONS
Post by: matt4949 on November 09, 2013, 04:01:50 pm
Quote from: CoryBee on November 09, 2013, 06:39:14 am
Quote from: matt4949 on November 08, 2013, 06:45:48 pm
thx cory

No problem. I actually stopped using him (have ordered a ton from him, good guy) as I started buying this to save money on the encoder.

http://www.ebay.com/itm/221281135290?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649 (http://www.ebay.com/itm/221281135290?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649)

$60 is not so bad for everything you need for a 2 player control panel


 :cheers:
yeah not bad only issue is the no choice of color on the joy stick pretty good deal though. I bookmarked the link.
Quote from: CaptainMarvel on November 08, 2013, 01:03:13 pm
Aren't there t-molding suppliers from whom you can request a sample?
Talked to Preston last night and he's sending samples seems like a nice guy too.
Title: Re: MATCHING T-MOLDING & BUTTONS
Post by: CoryBee on November 09, 2013, 05:00:42 pm
You can change color joysticks for $3 extra per joy I believe