Build Your Own Arcade Controls Forum

Software Support => GroovyMAME => Topic started by: Gamemaster86 on November 05, 2013, 09:55:31 am

Title: Hantarex polo 2 auto preset for VMMaker and GM
Post by: Gamemaster86 on November 05, 2013, 09:55:31 am

I've looked through the presets for groovymame but could only find the polo (15khz I believe) and polostar (trisync). I couldn't find anything regarding the polo 2 auto as I was reluctant to use the 15 and 25khz ranges from the polo star for this...

Anybody have a polo 2 auto who wouldn't mind sharing their specs?

Many Thanks

Title: Re: Hantarex polo 2 auto preset for VMMaker and GM
Post by: Gamemaster86 on November 06, 2013, 11:00:58 am

Maybe I'll start with the settings for the H9110 for the 15khz range and then go from there?

Title: Re: Hantarex polo 2 auto preset for VMMaker and GM
Post by: Calamity on November 06, 2013, 04:31:47 pm

I'd combine the arcade_15 and arcade_25 presets, as a starting point.

Title: Re: Hantarex polo 2 auto preset for VMMaker and GM
Post by: Gamemaster86 on November 08, 2013, 11:53:15 am

Quote from: Calamity on November 06, 2013, 04:31:47 pm

I'd combine the arcade_15 and arcade_25 presets, as a starting point.

Ah yes that's a good plan.

So in that case would I combine the CGA and EGA specs to put those values in VMMaker?

Thanks

Title: Re: Hantarex polo 2 auto preset for VMMaker and GM
Post by: Calamity on November 13, 2013, 12:37:43 pm

This would be better:

MonitorType = "CUSTOM"
monitor_specs0  15625-16200, 49.50-65.00, 2.000, 4.700, 8.000, 0.064, 0.160, 1.056, 0, 0, 288, 400
monitor_specs1  24960-24960, 49.50-65.00, 0.800, 4.000, 3.200, 0.080, 0.200, 1.000, 0, 0, 400, 768

Title: Re: Hantarex polo 2 auto preset for VMMaker and GM
Post by: Gamemaster86 on November 15, 2013, 04:37:22 am

OK thanks for that I'll give those a try and report back  :)