Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: thehammer12 on October 12, 2013, 06:53:21 pm

Title: Am I missing the video wires? Where does it go? Hanatrex Polo Question
Post by: thehammer12 on October 12, 2013, 06:53:21 pm

Im a total Newbie and dont know jack about monitors especially the Hanatrex Polo 25" haha, I was wondering if Im missing the video wires? Also looking on the chassis....where does it go on there from the Jamma harness??  I see a few open connections but not sure what goes where..... :dunno


Although the pics make parts of the chassis board look burnt, its not....mostly dirty and dusty with bad lighting (sorry Im in the garage haha).

Am I missing anything that you all can tell?

(http://i1165.photobucket.com/albums/q589/hotland4sale/arcade-album/20131012_164539_zps7c1d906a.jpg) (http://s1165.photobucket.com/user/hotland4sale/media/arcade-album/20131012_164539_zps7c1d906a.jpg.html)

(http://i1165.photobucket.com/albums/q589/hotland4sale/arcade-album/20131012_164546_zpsf9438ab5.jpg) (http://s1165.photobucket.com/user/hotland4sale/media/arcade-album/20131012_164546_zpsf9438ab5.jpg.html)

(http://i1165.photobucket.com/albums/q589/hotland4sale/arcade-album/20131012_164616_zpsf78c8da6.jpg) (http://s1165.photobucket.com/user/hotland4sale/media/arcade-album/20131012_164616_zpsf78c8da6.jpg.html)

(http://i1165.photobucket.com/albums/q589/hotland4sale/arcade-album/20131012_164500_zps5869968e.jpg) (http://s1165.photobucket.com/user/hotland4sale/media/arcade-album/20131012_164500_zps5869968e.jpg.html)

(http://i1165.photobucket.com/albums/q589/hotland4sale/arcade-album/20131012_164511_zps06c4e45f.jpg) (http://s1165.photobucket.com/user/hotland4sale/media/arcade-album/20131012_164511_zps06c4e45f.jpg.html)

(http://i1165.photobucket.com/albums/q589/hotland4sale/arcade-album/20131012_164526_zps68cafdb7.jpg) (http://s1165.photobucket.com/user/hotland4sale/media/arcade-album/20131012_164526_zps68cafdb7.jpg.html)

(http://i1165.photobucket.com/albums/q589/hotland4sale/arcade-album/20131012_164946_zpse9a2c9ca.jpg) (http://s1165.photobucket.com/user/hotland4sale/media/arcade-album/20131012_164946_zpse9a2c9ca.jpg.html)

Title: Re: Am I missing the video wires? Where does it go? Hanatrex Polo Question
Post by: grantspain on October 13, 2013, 04:33:25 am

you are missing the remote board

Title: Re: Am I missing the video wires? Where does it go? Hanatrex Polo Question
Post by: thehammer12 on October 13, 2013, 12:29:54 pm

Quote from: grantspain on October 13, 2013, 04:33:25 am

you are missing the remote board

Is it possible to find those anywhere?

Title: Re: Am I missing the video wires? Where does it go? Hanatrex Polo Question
Post by: grantspain on October 13, 2013, 12:55:41 pm

http://www.ebay.co.uk/itm/HATAREX-POLO-REMOTE-PCB-WITH-LEAD-USED-WORKING-/160757063449?pt=UK_Video_Games_Coin_Operated_MJ&hash=item256dde1f19 (http://www.ebay.co.uk/itm/HATAREX-POLO-REMOTE-PCB-WITH-LEAD-USED-WORKING-/160757063449?pt=UK_Video_Games_Coin_Operated_MJ&hash=item256dde1f19)

if you got the monitor in a cab then the remote is normally on an extension cable and located in coin door area or behind monitor bezel

Title: Re: Am I missing the video wires? Where does it go? Hanatrex Polo Question
Post by: thehammer12 on October 13, 2013, 02:28:01 pm

Quote from: grantspain on October 13, 2013, 12:55:41 pm

http://www.ebay.co.uk/itm/HATAREX-POLO-REMOTE-PCB-WITH-LEAD-USED-WORKING-/160757063449?pt=UK_Video_Games_Coin_Operated_MJ&hash=item256dde1f19 (http://www.ebay.co.uk/itm/HATAREX-POLO-REMOTE-PCB-WITH-LEAD-USED-WORKING-/160757063449?pt=UK_Video_Games_Coin_Operated_MJ&hash=item256dde1f19)

if you got the monitor in a cab then the remote is normally on an extension cable and located in coin door area or behind monitor bezel

SWEET, much appreciated. What about the video and power input? Does that video connector come from the jamma harness? And power input comes from ac....

Title: Re: Am I missing the video wires? Where does it go? Hanatrex Polo Question
Post by: grantspain on October 13, 2013, 03:28:07 pm

yeah the 6 pin header is direct from jamma connector-it should be marked on a sticker on the frame just below the connector what pin does what

the power in is mains(no isolation transformer required)-its a 3 pin mate n lok connector btw
http://www.mikesarcade.com/cgi-bin/store.pl?sku=MNL03P (http://www.mikesarcade.com/cgi-bin/store.pl?sku=MNL03P)

Title: Re: Am I missing the video wires? Where does it go? Hanatrex Polo Question
Post by: thehammer12 on October 13, 2013, 07:50:47 pm

Grantspain, I owe you big time  :notworthy:

I found the Remote pcb in a box, the monitor didnt come from a cabinet. I got it from another member as-is along with some spare parts, well It worked. I swear I almost tossed it last week because it was separated from the wire and thought it was a scrap part haha.

(http://i1165.photobucket.com/albums/q589/hotland4sale/arcade-album/20131013_163619_zps45f70c73.jpg) (http://s1165.photobucket.com/user/hotland4sale/media/arcade-album/20131013_163619_zps45f70c73.jpg.html)


and I figured out the video and power input, it took a little tweaking but I also got everything powered up.....

(http://i1165.photobucket.com/albums/q589/hotland4sale/arcade-album/20131013_173453_zpseceb5cf6.jpg) (http://s1165.photobucket.com/user/hotland4sale/media/arcade-album/20131013_173453_zpseceb5cf6.jpg.html)


ULTRAMAN..........

Now time to get joysticks and buttons and wire them up, and good tutorials or videos on that?