Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: moosekatdeluxe on October 08, 2013, 09:30:20 am

Title: Anyone know where to get 10mm Black T-Moulding
Post by: moosekatdeluxe on October 08, 2013, 09:30:20 am

Hi guys,
subject line says it all. After black 10mm t-moulding in the UK. Cannot for the life of me find it. Has anyone been able to source it??

Thanks

Nick

Title: Re: Anyone know where to get 10mm Black T-Moulding
Post by: DHTech on October 08, 2013, 10:21:17 am

Closest to 10mm is 1/2" (12.7mm) form http://www.arcadeworlduk.com/categories/Arcade-Parts/T-Molding/Half-Inch-T-Molding/ (http://www.arcadeworlduk.com/categories/Arcade-Parts/T-Molding/Half-Inch-T-Molding/)

Title: Re: Anyone know where to get 10mm Black T-Moulding
Post by: Minwah on October 08, 2013, 10:25:42 am

As DHT says, you can't get 10mm AFAIK.

Title: Re: Anyone know where to get 10mm Black T-Moulding
Post by: PL1 on October 08, 2013, 01:35:58 pm

Check out this (http://forum.arcadecontrols.com/index.php/topic,132413.0.html) post by BobA about using an edge trimmer.   ;D

(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=132413.0;attach=289653;image)


Scott

Title: Re: Anyone know where to get 10mm Black T-Moulding
Post by: moosekatdeluxe on October 09, 2013, 02:11:23 pm

Thanks guys,
Unfortunately my mdf is too thin to use that tool. What I am gonna do is get some 10mm MDF and a test bit of tmounting to see if i can trim it with a very shap knife. Either that or go to halfords and get the 10mm chrome trim they sell.

It also turns out that 10mm mdf is pretty hard to find in the uk too!  It is usually either 9 or 12mm.

Title: Re: Anyone know where to get 10mm Black T-Moulding
Post by: eds1275 on October 09, 2013, 05:16:35 pm

http://www.homedepot.ca/product/veneer-trimmer-double-edge/981951 (http://www.homedepot.ca/product/veneer-trimmer-double-edge/981951)

does one side at a time, works nicely.