Build Your Own Arcade Controls Forum

Main => Buy/Sell/Trade - non-retail => Topic started by: bimm25e on October 01, 2013, 01:07:56 pm

Title: Comission Job 24VDC pop driver
Post by: bimm25e on October 01, 2013, 01:07:56 pm: Hey All I need a circuit built for me that will run off of a 1.5VDC (i think thats the button current for a JAMMA rig right?) and "POP" a 24VDC solenoid. I have a 24VDC power supply already and would need 2 of the circuits (preferably both circuits can use the 1 power supply as a power source.

This is for a Recoil Solenoid that i've put in a Namco gun - I couldnt find a stock NAMCO replacement solenoid so I got a diferent one but it is tested and working with the power supply i'll be using.

The goal would be to have the circuit recoil repetedly (like a machine gun) if the trigger is held down so in Area 51 when you get the machine gun upgrade holding the trigger will accurately recoil with the shots fired.

I dont want to affect the trigger operation, 1 pull = 1 pull

If thats too complicated I'm okay with a cicruit what simply holds the solenoid open while im holding the trigger.... I would prefer option A however.
Title: Re: Comission Job 24VDC pop driver
Post by: Nephasth on October 01, 2013, 01:11:05 pm: Check this out: http://forum.arcadecontrols.com/index.php/topic,100607.msg1144773.html#msg1144773 (http://forum.arcadecontrols.com/index.php/topic,100607.msg1144773.html#msg1144773)
Title: Re: Comission Job 24VDC pop driver
Post by: bimm25e on October 01, 2013, 02:10:37 pm: Quote from: Nephasth on October 01, 2013, 01:11:05 pm
Check this out: http://forum.arcadecontrols.com/index.php/topic,100607.msg1144773.html#msg1144773 (http://forum.arcadecontrols.com/index.php/topic,100607.msg1144773.html#msg1144773)

Thanks,

can someone point me to a SSR that would accept a 1.5VDC "trigger" and support a 24VDC output current.

would this work?
http://www.amazon.com/Relay-Input-Output-6-Pin-Plastic/dp/B00B88DDCK/ref=sr_1_23?s=industrial&ie=UTF8&qid=1380652711&sr=1-23&keywords=solid+state+relay (http://www.amazon.com/Relay-Input-Output-6-Pin-Plastic/dp/B00B88DDCK/ref=sr_1_23?s=industrial&ie=UTF8&qid=1380652711&sr=1-23&keywords=solid+state+relay)
Title: Re: Comission Job 24VDC pop driver
Post by: bimm25e on October 02, 2013, 06:18:01 pm: http://www.eugene.kizza42.com/Arcade/Finaldriver.jpg (http://www.eugene.kizza42.com/Arcade/Finaldriver.jpg)

http://forum.arcadecontrols.com/index.php/topic,132773.msg1364783.html#msg1364783 (http://forum.arcadecontrols.com/index.php/topic,132773.msg1364783.html#msg1364783)

So I'll paypal someone $5 to make me a shopping cart on jameco.com with all the pieces I'd need to build 4 of this circuit.

Assume all I have is a soldering iron, some solder, the solenoid, trigger switch, lightgun pcb
So I would need breadboards, wire to use on the breadboard, 24V Power Supply, resisotrs, 555 timer...etc...

I get the idea of making one, I can follow the diagram, I think I could make one, but I certainly don't understand the difference between the 29 different 555 timers they have for sale.

I think the shopping list would be an awesome thing to add to that tutorial thread as well. I'm finding I can build this stuff but finding the correct pieces is much more than half the battle for me
Title: Re: Comission Job 24VDC pop driver
Post by: bimm25e on October 03, 2013, 10:58:04 pm: Got some help in a PM,

don't have a parts list to share unfirtunately, but thanks for the help!

All set here