Build Your Own Arcade Controls Forum

Main => Buy/Sell/Trade - non-retail => Topic started by: caius on September 27, 2013, 06:50:55 am

Title: [SERVICE] Arcade PCBs repair
Post by: caius on September 27, 2013, 06:50:55 am

Hi,
I'm Fabrizio (caius) from Italy,
I'm a software/hardware technician and I've been arcade repairing for several years.
I can repair all kind of PCBs from early '80 to currents ones, either thue-hole or SMD ones, I can also program a large number of devices (EPROM, BPROM, PLD, flash EEPROM,PIC, etc).


This is my policy:
The cost of the repair will be charged at the end and customer will pay ONLY after testing succesfully his PCB.
In case repair is not possible, user has to pay ONLY return shipping cost.

Here are some positive feedbacks on my service:

http://shmups.system11.org/viewtopic.php?f=4&t=45104 (http://shmups.system11.org/viewtopic.php?f=4&t=45104) .

If you are registered on Shootem Up Forum you can see feedbacks of user 'caius'.

http://translate.google.it/translate...2461%23p143388 (http://translate.google.it/translate...2461%23p143388)

http://www.jammarcade.net/repairers/ (http://www.jammarcade.net/repairers/)


If you are interested in or want more information, please contact me.Serioulsy.
Thanks.

Title: Re: [SERVICE] Arcade PCBs repair
Post by: htc on November 14, 2013, 04:45:07 am

Hi,
Are you able to program Konami RTC Chips? I would need one for my driving Party machine.
further i would need a flyback for a Wells Gardner 27D9800 Chassis.
Thanks

Title: Re: [SERVICE] Arcade PCBs repair
Post by: caius on December 17, 2013, 11:17:17 am

Hi and sorry for late reply.Can you tell me the exact part name of the chip you want me to program?If it's a M48T58Y,  I can program it.
Thanks