Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: Tzakiel on September 25, 2013, 06:09:54 pm

Title: On a quest for a component-in 27" CRT
Post by: Tzakiel on September 25, 2013, 06:09:54 pm

I'm looking for a component-input TV which is CRT (curved or flat OK) and will fit into a UAII cabinet (outer dimensions less than 27") without having to take the casing off. I am scared of killing myself with shocks or imploding the tube.  I know there are Sony WEGA crts with great screens and component in, but they have speakers on left and right and make the 27" very wide.

Need the component so I can get true scanlines with soft15khz and powerstrip.

Does such a beast exist? Anyone know a model # to check out?

Title: Re: On a quest for a component-in 27" CRT
Post by: TalkingOctopus on September 26, 2013, 12:10:31 am

As I replied in the other thread, the Sharp 27uf-500 is less than 26" wide. However, it still may be too deep.

Title: Re: On a quest for a component-in 27" CRT
Post by: Tzakiel on September 26, 2013, 12:33:06 am

Thanks. What about this toshiba 27a34

http://www.amazon.com/Toshiba-27A34-FST-Black-Tube/dp/B0001YI0Z2/ref=cm_cr_pr_product_top#productDetails (http://www.amazon.com/Toshiba-27A34-FST-Black-Tube/dp/B0001YI0Z2/ref=cm_cr_pr_product_top#productDetails)

Title: Re: On a quest for a component-in 27" CRT
Post by: Well Fed Games on September 26, 2013, 11:02:09 am

Check out http://forum.arcadecontrols.com/index.php/topic,113964.msg1210278.html#msg1210278 (http://forum.arcadecontrols.com/index.php/topic,113964.msg1210278.html#msg1210278)
In particular I have one of the 27" Sansui TVs (really it is more like 26") that will go in a build eventually.