Build Your Own Arcade Controls Forum
Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: Kamonow on September 07, 2013, 01:24:34 pm
-
:banghead:I have a friend that is getting a 2006 Golden Tee Complete ready for me. Had everything ready to go, then noticed that there was something wrong with the motherboard. There's a small, rectangular black box that has about 50 right angle wires on it coming off the motherboard. They appeared to be smashed in (like a bad radiator) and a few were broken. He went to pick up another board and replaced all the chips and put it back together and it still didn't work. He figured there's a security problem with swapping to a different board. Is there some kind of serial numbers that need to be matching with the system when replacing a piece like that? If so, is there a way around that? Or do we have to send it in the get fixed by IT? I know they charge about $125 plus shipping both ways. I appreciate any replies. Thank you
-
depending on the color of the board
red or green..
now onto security
there is 2 chips of concern u53 and u93
they must match the s/w on the harddrive
now when u say it is not working ?
would please expand on that..as there is a wack of way's to tell if the board is brain dead or if it is just refusing to boot,more details here are needed
like is there blinking light's on the board ?
do u get video ?
etc etc
more details are needed
ed