Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: mado21 on August 29, 2013, 11:31:00 am

Title: attaching plexiglass to CP
Post by: mado21 on August 29, 2013, 11:31:00 am

im making a stand alone control panel for my comp.but the one thing i carnt find how to do ,is how to attach the plexiglass over the CP artwork.ive serched the forums but cant find a clear answer

mado21

Title: Re: attaching plexiglass to CP
Post by: BobA on August 29, 2013, 11:50:25 am

Buttons should be enough to hold the plexi in place.

Title: Re: attaching plexiglass to CP
Post by: jdbailey1206 on August 29, 2013, 12:03:13 pm

Buttons do very well.  I even bought security screws and drilled all the way through and countersunk a hole below the bolt for a nut that held the bolt down.

Title: Re: attaching plexiglass to CP
Post by: zanna5910 on August 29, 2013, 12:10:05 pm

Yea, mine is just be held by the buttons.  I ran T Molding around my CP top as well.  Never had any issues with it coming up or moving at all.

Title: Re: attaching plexiglass to CP
Post by: severdhed on August 29, 2013, 12:23:51 pm

Buttons and t molding are enough to keep it in place.

Title: Re: attaching plexiglass to CP
Post by: mado21 on August 29, 2013, 01:21:15 pm

thanks guys ,im not usings t-moulding, so will just make do with the buttons