Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: kaptaink_cg on August 17, 2013, 02:03:32 am

Title: Atari Yoke (Star Wars) Plug Wiring Diagram
Post by: kaptaink_cg on August 17, 2013, 02:03:32 am

I recently purchased an Atari Star Wars yoke and hooked it up to a U-HID controller.  I wanted to keep the yoke as original as possible, so I found the appropriate molex plug and wired the U-HID into that.  At the time I wasn't able to find any wiring diagrams for the yoke plug, so I created one for others to use.  Attached below!

Title: Re: Atari Yoke (Star Wars) Plug Wiring Diagram
Post by: italiandoh on August 17, 2013, 09:54:44 am

Cool, thanks for sharing it  :cheers:

Title: Re: Atari Yoke (Star Wars) Plug Wiring Diagram
Post by: PL1 on August 17, 2013, 12:39:59 pm

Ninten-doh posted a version here (http://forum.arcadecontrols.com/index.php/topic,104631.msg1107031.html#msg1107031).

Based on an observation by Gray_Area, I updated the image to indicate X and Y axis.

(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=134006.0;attach=295045;image)

Also, If you are using the :angry: RAM Controls USB adapter, the triggers and buttons are as follows:

Pin 1 = HID Button 1
Pin 2 = HID Button 4
Pin 3 = HID Button 3
Pin 4 = HID Button 2

Twisty Wrist (http://www.twistywristarcade.com/) has the best price on the connectors that I've found.


Scott