Build Your Own Arcade Controls Forum
Main => Buy/Sell/Trade - non-retail => Topic started by: BadMouth on August 09, 2013, 06:29:39 pm
-
EDIT: Monitor added - see reply #7 SOLD!
Need to clear this stuff out. BYOAC gets dibs before it goes on craigslist and ebay.
See pics for condition. I don't have a way to test most of this stuff, so consider it "untested".
Will consider trades for gutted cab with coin door or Socket AM2 mobo.
Pics here: http://www.flickr.com/photos/25643351@N07/sets/72157635004570018/ (http://www.flickr.com/photos/25643351@N07/sets/72157635004570018/)
Initial D dashboard with ffb motor & shifter, but missing steering wheel - $50 + shipping
Sega driving pedals 2 sets - $20 each + shipping
Initial D seat & sliders - see photos for condition - free - local pickup only
Sega Up/Dn shifter cover - $5 + shipping (or free with local pickup)
3A Racing seat with sliders - velor material, like new, never mounted - $75 - local pickup only
Gauntlet Legends showcase control panel - missing a few buttons, no joysticks, no light behind marquee - free - local pickup only
Megatouch XL tabletop cab with power supply and boards with Gold Key and Platinum CF card w/IDE adapter. Has issues with video. No video signal to monitor. About six months ago, I reflowed the vga connector on the mobo and it started working again. It's been sitting since then and now doesn't work again. This has been an ongoing issue and I'm tired of messing with it. Going to use the LCD monitor in a new jukebox. Monitor not included.
Consider it no cd-drive included. I have an old one here you can have, but I'm not sure if it would work with the megatouch board. I think I have the gold CD somewhere, but it is cracked to bits around the center. I did manage to get a good rip from it once upon a time. If I still have the original disc, it's yours.
$50 - Local pickup only for the cabinet, but I will ship the boards.
EDIT: Currently working. It started working again and my other one stopped working. ::)
Pair of Beast Busters positional guns - all gears are good. It looks like one of the pots was replaced with a cheaper one at some point. The ends of the wiring harness have been cut. One base has a crease where it was bent once upon a time that I couldn't get all the way smoothed out. See pic. Missing screws to hold bases together. $20 + shipping
I-Go stowaway Bluetooth keyboard - doesn't work with my new windows phone, so I have no use for it. $20 + shipping.
Coin box holder for Over/Under coin door with 2 sets of service buttons, counters and volume control. $10 + shipping
-
I would be interested in that Bluetooth keyboard. Shipping to 56377.
Sent from my SGH-T989 using Tapatalk 2
-
I've been lurking here for a long time, but have planned on posting for some time now. I'm more of a regular on KLOV, but am stating up a bartop project.
Discovering somebody local on here (I'm in Bellefonte), however, has brought me out.
I might be able to use the free pickup stuff, if there are no takers. Are there any buttons with the cp?
Paul
-
Yeah same here, I'm in Lock Haven. Not really anything in that lot I need at the moment but BadMouth - I never realized you were in State College. I have messages you before in the past and gotten some great help from you. Nice to know you are close.
Hi Paul.... Even closer to you in Bellefonte.
-
Hey ABACABB! Central Pa represent!
-
I would be interested in that Bluetooth keyboard. Shipping to 56377.
Sent from my SGH-T989 using Tapatalk 2
PM sent
-
Maytown represent!
-
MONITOR NOW SOLD
Finally got around to making a power cable for the monitor and testing it.
29" Medium Resolution (640x480) Monitor $100 - Local pickup only - I don't know much about arcade monitors.
It's a 29" that connects via standard VGA cable. It looks good to me. I don't notice any burn in. Any marks in the video are on the inside of the glass in front of it. The accompanying video was made by connecting it to my laptop.
Bezel, glass, & homemade power cable included. I'll need help removing it from the Initial D cab, as I plan on re-using the sides.
29 inch monitor marvel vs capcom (http://www.youtube.com/watch?v=VrqedAo84os#ws)
WP 20130812 232405Z (http://www.youtube.com/watch?v=ZqNZw3c15oo#ws)
-
Also have a Guitar Hero Warriors of Rock PS3 wireless controller with dongle.
Used very little to play Frets On Fire on my emulator setup.
$30 + shipping or free local pickup SOLD
I also have some xbox (original xbox) dance pads with xbox to PC adapters that I was using with Stepmania.
I'll have to dig them out to take pics. Make offer.
-
Last Call. Everything goes on ebay tomorrow.
-
you know you want to bring that monitor down to me in Delaware....
-
Argh, what timing! I lived in SC from 2008-2012 and my 29" CRT monitor died in 2012! I just drove up in June to visit. Wish I was still there and not 400 miles away, that monitor could drop right into my cab. Will probably be a good while before I am back in SC, though.
-
you know you want to bring that monitor down to me in Delaware....
(http://gifrific.com/wp-content/uploads/2012/08/Aint-Nobody-Got-Time-for-That.gif)
I'm trying to stop myself from buying a gutted 25" cab to shoehorn it into (if it can be done). :banghead:
Hopefully it sells quickly on fleabay so I'll stop having those thoughts.
-
I'd be trying to wedge it into the ShoRyuKade >:D
-
i want the initial D seat or the racing one but cant make the 3hr drive to stage college for a couple weeks :( :hissy:
-
Bummer. 6 hours away. Too far for the monitor.
-
i want the initial D seat or the racing one but cant make the 3hr drive to stage college for a couple weeks :( :hissy:
Where you at? I'm 3hrs south or southeast fairly often.
Although I might throw them in the girlfriend's yardsale on Saturday. :-\
Bummer. 6 hours away. Too far for the monitor.
I'm now holding the monitor for ABACABB until he's in the neighborhood again.
-
im in Norristown, just outside of Philly. right near King of Prussia if youve heard of that area.