Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: Caparo8bit on August 08, 2013, 10:14:59 pm
-
hello there i just got this fan for free idk much about this.. sticker says frull range :dunno can i just connec fan to power :dunno
(http://i.imgur.com/9HNjgxL.jpg) (http://i.imgur.com/E71mZt9.jpg) (http://i.imgur.com/suoPijh.jpg)
-
That's not a fan, it's a power supply
-
That's not a fan. It's a PC power supply. It says right there on the Zalman sticker.
-
Its not a power supply, its a power supply shell with the fan. its pretty much the same as a PC fan.
-
well can i take the fan out and connected in a 12v line?
-
LoL, it looks like a power supply. Or is it a power supply shell with a fan in it?^-^
Sent from my SGH-T989 using Tapatalk 2
-
ok my arcade has a fan and two extra power ports available can i connect second fan on those ports (secon fan is for cpu) chec pics please
"And I know the im going for the Noob of the year"
(http://i.imgur.com/QsR5o0Y.jpg) (http://i.imgur.com/Cr51fZ8.jpg)
-
Hey, is it me, or does that fan look like power supply?
-
The fan in your last photo says 12VDC, so yes you can connect it to 12 volts. the direction is controlled by which way you connect the wires. If it is blowing the wrong way, just reverse the wires.
-
Hey, is it me, or does that fan look like power supply?
i gues its you
-
The fan in your last photo says 12VDC, so yes you can connect it to 12 volts. the direction is controlled by which way you connect the wires. If it is blowing the wrong way, just reverse the wires.
thanks question fan for arcade amp is blowing out shold i put second fan blowing in
(http://i.imgur.com/PWIrvoy.jpg)
-
I would set it to blow in so that you get a positive airflow through the case.
-
Hey, is it me, or does that fan look like power supply?
i gues its you
:lol
-
The fan in your last photo says 12VDC, so yes you can connect it to 12 volts. the direction is controlled by which way you connect the wires. If it is blowing the wrong way, just reverse the wires.
thanks question fan for arcade amp is blowing out shold i put second fan blowing in
(http://i.imgur.com/PWIrvoy.jpg)
Set the one at the bottom to blow air into the cabinet (Will probably want reversing from existing) and then set the one you have higher up to suck air out of the cabinet. Warm air rises so this would be the most effective. I would recommend a dust filter for the one blowing air into the cab.
-
ok my arcade has a fan and two extra power ports available can i connect second fan on those ports (secon fan is for cpu) chec pics please
"And I know the im going for the Noob of the year"
(http://i.imgur.com/QsR5o0Y.jpg)
DONT TOUCH THOSE.
Thats the AC line in , its fused from the power cord to the power supply. If you want to tap 12v, tap it off the power supply where it is clearly labeled +12v. Honestly if you're putting a PC in there I'd just get another PC fan and tap it off the PC power supply.