Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: Caparo8bit on August 06, 2013, 02:44:27 pm
-
hello there im using j-pac for my project (first project) with a laptop do i still need to connect a keyboard?
and how come j-pac vga is male no female i bought a vga male\male now i have to buy a adapter :banghead:
thanks to you guys my project is almost done :notworthy:
-
ok so now every time a connect the usb from the j-pac (PC KB/USB) in to my laptop usb for some reason the computer starts tapping q569 q569 q569 and wont stop............. :angry: help please
-
ok so now every time a connect the usb from the j-pac (PC KB/USB) in to my laptop usb for some reason the computer starts tapping q569 q569 q569 and wont stop............. :angry: help please
You probably have those inputs shorted in your arcade wiring.
-
ok so now every time a connect the usb from the j-pac (PC KB/USB) in to my laptop usb for some reason the computer starts tapping q569 q569 q569 and wont stop............. :angry: help please
You probably have those inputs shorted in your arcade wiring.
That or you have the wires hooked to the Normally Closed (NC) and common (COM) tabs on the microswitch instead of the Normally Open (NO) and COM tabs.
(http://arcadecontrols.com/images/microswitch_closeup_labelled2.JPG)
Scott
-
ok so now every time a connect the usb from the j-pac (PC KB/USB) in to my laptop usb for some reason the computer starts tapping q569 q569 q569 and wont stop............. :angry: help please
You probably have those inputs shorted in your arcade wiring.
That or you have the wires hooked to the Normally Closed (NC) and common (COM) tabs on the microswitch instead of the Normally Open (NO) and COM tabs.
(http://arcadecontrols.com/images/microswitch_closeup_labelled2.JPG)
Scott
dude you are the best :applaud:...ground cable was on ( NO) and and 2nd cable was on (com) :notworthy: :notworthy: :notworthy:
-
ok so now every time a connect the usb from the j-pac (PC KB/USB) in to my laptop usb for some reason the computer starts tapping q569 q569 q569 and wont stop............. :angry: help please
You probably have those inputs shorted in your arcade wiring.
yeah found them tysm
-
Thank you. :cheers:
ground cable was on ( NO) and and 2nd cable was on (com)
Looks like you were using part of my "backward" wiring trick.
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=121807.0;attach=238745;image)
More on a similar, but larger-scale related wiring technique soon. . . . Right, Jon? ;D
Scott
-
Thank you. :cheers:
ground cable was on ( NO) and and 2nd cable was on (com)
Looks like you were using part of my "backward" wiring trick.
(http://forum.arcadecontrols.com/index.php?action=dlattach;topic=121807.0;attach=238745;image)
More on a similar, but larger-scale related wiring technique soon. . . . Right, Jon? ;D
Scott
......was like that. I bought it from a guy and idk if I over pay $200 is a show case 33" deluxe snk vs stf I'm taking arcade monitor out cant make it work with my laptop ( widows 7 hd intel graphics) if you pay delivery monitor is all yours ... I'm planing to use LED 32" ( stretched picture) to get full screen . Lepai 2.1 amp. My next step is map c. Panel to Maximus arcade... Any idea how......?
-
Are you sure you want to get rid of the monitor?
Instead of a laptop, you can use a cheap PC to get it up and running.
BTW, the thread offering the monitor for trade should be in the Buy/Sell/Trade forum.
Scott
-
Are you sure you want to get rid of the monitor?
Instead of a laptop, you can use a cheap PC to get it up and running.
BTW, the thread offering the monitor for trade should be in the Buy/Sell/Trade forum.
Scott
cheeeeeeeeezzzzzz :o i just removed the monitor few mins ago and is heavy as helllllll.....!and yeah i have a 32" led sitting in the garage and i like how mame looks using hdmi from pc/led . shiping must cost $$$$$$$$ lots...