Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Stormy151 on November 15, 2003, 02:48:27 am

Title: Restrictor mounting plate template?
Post by: Stormy151 on November 15, 2003, 02:48:27 am

Is there a download of a template for the mounting plate for the Oscar restrictor plates?  I'm laying out my controls and want to ensure I have room between the sticks and the buttons, as I plan to buy a couple 4 way restrictor plates.

Also, since I have your attention ;), what's the recommended depth to rout a hole in a 3/4 panel for a Happs Super?

Thanks!

Title: Re:Restrictor mounting plate template?
Post by: allroy1975 on November 16, 2003, 02:06:15 am

yeah, Oscar has a link on his page

http://oscarcontrols.com/joystick/MountingPlate.pdf

I went and got it for you....

Allroy

Title: Re:Restrictor mounting plate template?
Post by: OSCAR on November 16, 2003, 10:15:21 am

Thanks, Allroy!  I missed this thread.

When printing the template, check that you don't have Acrobat set to scale the print to fit the page, but at 100% so it prints out correctly.  To make sure it printed correctly, the plate size is 4" x 6".

Title: Re:Restrictor mounting plate template?
Post by: Stormy151 on November 16, 2003, 10:39:57 pm

Thanks!  Wierd thing is, before I posted I had looked on the site but hadn't seen the link.

Oops.  :-[

Thanks again.