Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: MastarArcade on July 29, 2013, 01:11:22 pm
-
Can anyone help me identify the proper mating receptacle for the Molex connector coming from my Nintendo VS control panel? (see the attached picture)
I believe these to receptacles are...
Molex (12): 03-09-1125
Molex (15) :03-09-1157
...so I'll need to get the corresponding plugs, but if anyone can confirm (before I order the wrong stuff!), I'd appreciate it.
Thanks!
-
...to better explain myself, my goal is to make a custom harness that goes from the Molex Connector on the VS Control panel in to an I-PAC.
However, if anyone has an alternative suggestion that might be easier, I'm all ears.
-
To me, the 12pos connector plug looks like it would be a: .084 MLX molex
http://www.twistywristarcade.com/molex-084-mlx-series/332-connector-plug-12pos-084.html (http://www.twistywristarcade.com/molex-084-mlx-series/332-connector-plug-12pos-084.html)
Then the 15pos looks like this one to me, from the pic.
http://www.twistywristarcade.com/molex-084-mlx-series/330-connector-plug-15pos-084.html (http://www.twistywristarcade.com/molex-084-mlx-series/330-connector-plug-15pos-084.html)
hope this helps.
-
They're probably not Molex .093 since the P/Ns you posted have a triangular pattern on one side.
(http://www.twistywristarcade.com/801-899-home/connector-plug-15pos-093.jpg)
The Star Wars yoke uses Molex MLX series connectors and those look different from the pic you posted, too.
Twisty Wrist has the Molex .093 (http://www.twistywristarcade.com/50-molex-093-connectors) connectors and Molex MLX (http://www.twistywristarcade.com/49-molex-084-mlx-series) connectors at great prices, but I think you're looking for something else.
Scott
-
This seems that it its a harder search that necessary. :'(
I think I may just end up wiring my own harness with quick connects.