Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: gurusi on July 17, 2013, 08:26:50 am

Title: Mini PAC mouse inputs only respond once
Post by: gurusi on July 17, 2013, 08:26:50 am

Hi, my control panel is almost setup with exception of the mouse inputs. I have them setup as per other posts (extension wire used in empty housing to the correct inputs).

The inputs/left & right buttons only work once. After that they are non responsive unless I unplug the minipac from the USB and back in again. After that they only work once again.

I have tried disconnecting my Bluetooth mouse from start up but it makes no diference.

The inputs and wiring must be fine for them to respond initially, but I can't figure out what's stopping them after that....

I am running xp and using ultralux buttons. I also have a utrak and spinner connected via the mini pac

Title: Re: Mini PAC mouse inputs only respond once
Post by: Hootee on July 21, 2013, 03:41:20 am

I have the same problem. Mouse buttons works just once. After that not even my regular mouse(usb) buttons work in linux. In Windows regular mouse buttons still works.

I have tested with Windows 7 and Linux.

If somebody have solved this please answer.
Thanks.