Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: epac90 on July 09, 2013, 02:59:44 pm

Title: U-Trak question
Post by: epac90 on July 09, 2013, 02:59:44 pm

So I went to hook up my U-Trak last night to my optipac, and I noticed that one of the connections did not have a black cable (ground) going to the 4 pin connector.  Is the ground between the 2 connections just a common ground?  Or are they isolated?  I'm assuming if they're connected I can just make a jumper from one connection ground to the other. 

Title: Re: U-Trak question
Post by: PL1 on July 09, 2013, 03:10:42 pm

You are correct.

The ground connects to both optical boards inside the UTrak.


Scott

Title: Re: U-Trak question
Post by: epac90 on July 09, 2013, 03:13:30 pm

Awesome, thank PL1.  Really didn't wanna have to disassemble it to solder a wire to the board.  I'll just make a jumper then  :cheers: