Build Your Own Arcade Controls Forum

Main => Buy/Sell/Trade - non-retail => Topic started by: RGB on June 25, 2013, 08:50:09 am

Title: Reco PCB - a JAMMA button remapping and autofire device [PL-EU]
Post by: RGB on June 25, 2013, 08:50:09 am

(http://farm6.staticflickr.com/5334/8752997135_0d6c1d5d48.jpg)(http://farm3.staticflickr.com/2857/8754182010_3224c11e6e.jpg)

Reco PCB is a microcontroller based device that allows you to change the button layout in your arcade cabinet (or supergun’s joypad/arcade stick) on-the-fly. It also has a fully configurable autofire feature for every button.

Reco PCB plugs between a JAMMA PCB game and an arcade cabinet’s/supergun’s JAMMA harness. By pressing a combination of buttons, you can access the “configuration mode” which allows you to remap the buttons, enable autofire and access the PCB game’s test/service modes.

The official thread with full specs can be found on the shmupsforum (http://shmups.system11.org/viewtopic.php?f=6&t=45870) and now   here as well (http://forum.arcadecontrols.com/index.php/topic,133071.0.html)

Pricing:

• Reco PCB - 50 EUR
• CPS2 kick harness, 25cm long - 7 EUR - http://farm6.staticflickr.com/5329/8945837235_24cb8d08e3_c.jpg (http://farm6.staticflickr.com/5329/8945837235_24cb8d08e3_c.jpg)
  
• 6 pin harness that connects arcade cabinet's P1&2 buttons 4, 5, 6 with the Reco PCB; 100cm long and ends with quick disconnects - 5 EUR
• 6 pin harness that connects arcade cabinet's P1&2 buttons 4, 5, 6 with the Reco PCB; 100cm long. This one has ends with both male and female quick disconnects - 7 EUR - http://farm4.staticflickr.com/3752/8946391840_bcdafcbe41_c.jpg (http://farm4.staticflickr.com/3752/8946391840_bcdafcbe41_c.jpg)
  
• external LED cable -> to follow

The boards are assembled by me and I need around a week of lead time to put them together (if I get many orders, this can be more than a week, but I will give notice about it in a timely manner). I assemble boards only when I get an order.
You will have to specify if you want the version with the connectors or screw terminals.
Each PCB will be safely packed in a box and put in an antistatic bag.

Shipping via Registered Priority Mail to anywhere in the world - 7 EUR

I accept payment via paypal and require 4% to cover the p/p fees, or money send as a gift.

PS I'm new to BYOAC, but I've got +82 positive (only positive) feedback at shmupsforum, mostly as a seller.

Cheers,
RGB