Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: jackiabu on June 14, 2013, 12:21:10 pm

Title: MONITOR FLEXSCAN T67S
Post by: jackiabu on June 14, 2013, 12:21:10 pm

hi


I brought FLEXSCAN T67S-screen monitor.
I'm trying to connect it to VGA ARCADE and I have no signal.
First of all I tried connecting via RGB. Then through VGA.

Anybody know this monitor? I tried to search Google. http://www.monitorworld.com/Monitors/eizo/flexscant67s.html (http://www.monitorworld.com/Monitors/eizo/flexscant67s.html) but no luck :'(

some pics

(http://imageshack.us/a/img109/5899/2t8.jpg)

(http://imageshack.us/a/img844/751/2ga7.jpg)

(http://imageshack.us/a/img594/7531/7psz.jpg)

Title: Re: MONITOR FLEXSCAN T67S
Post by: Rigby on June 14, 2013, 01:07:07 pm

the CGA signal (15.75kHz) produced by most arcades is too low to work on that monitor.  The sticker on the thing says the ranges it accepts, and you're putting too low of an "fH" signal into it.

It will accept VGA, though.

Computer monitors and tubes are not created like CGA monitors & tubes.

Title: Re: MONITOR FLEXSCAN T67S
Post by: jackiabu on June 14, 2013, 02:19:14 pm

Quote from: Rigby on June 14, 2013, 01:07:07 pm

the CGA signal (15.75kHz) produced by most arcades is too low to work on that monitor.  The sticker on the thing says the ranges it accepts, and you're putting too low of an "fH" signal into it.

It will accept VGA, though.

Computer monitors and tubes are not created like CGA monitors & tubes.

Thanks

Too bad. I wanted to use the RGB port. :-[

So rare today to find a 20 inch monitor with RGB output :hissy:

Title: Re: MONITOR FLEXSCAN T67S
Post by: Gray_Area on June 16, 2013, 01:20:53 pm

Quote from: jackiabu on June 14, 2013, 02:19:14 pm

Too bad. I wanted to use the RGB port. :-[

So rare today to find a 20 inch monitor with RGB output :hissy:

.......hah hah hah hah hah hah hah.......

Yeah, this is a case of 'not any hole'll do ya.....'