Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: GeoMan on June 13, 2013, 03:12:58 pm

Title: Ultimarc MiniGrip Joystick rotate handle
Post by: GeoMan on June 13, 2013, 03:12:58 pm

Has anyone rotated the Ultimarc MiniGrip handle, to look like this?

(http://farm9.staticflickr.com/8106/8458436681_1aefbfe029_b.jpg)

If so, what needs to be removed to turn the handle 90^o? Do i have to disassemble the handle?

Title: Re: Ultimarc MiniGrip Joystick rotate handle
Post by: PL1 on June 13, 2013, 03:48:02 pm

To change the orientation of the mounting plate from the long axis of the plate being on the X-axis to the Y-axis, just remove the 4 screws holding the mounting plate to the joystick base and turn it 90 degrees.

Your picture shows 3 of the 4 screws.


Scott

EDIT:  Also note that there are two tabs on the pivot that keep the stick from rotating.

Title: Re: Ultimarc MiniGrip Joystick rotate handle
Post by: GeoMan on June 13, 2013, 03:59:36 pm

Thanks!