Build Your Own Arcade Controls Forum
Main => Project Announcements => Topic started by: Sp3c7r3 on June 10, 2013, 04:24:04 am
-
I finished it already but wanted to show it here too. It's a Weecade cabinet with Hyperspin frontend and I call it the Hyperwee :P
It all started as an abandoned project. A guy I know who sell these as flat packs got one back from a customer who wanted a refund. The cabinet was already assembled, painted and had a monitor and speakers installed. It had minor scratch marks here and there but I got it for a very fair price.
This is how it looked like when I got it:
(https://lh4.googleusercontent.com/-7-qXTZp1kN0/Uck8pUofl9I/AAAAAAAAAcE/FKhmrYwVGUY/w751-h563-no/IMG_0951.JPG)
It came with a control panel plexiglass, the previous owner had cut himself, but NONE of the holes lined up?!? If you put in the buttons for player 1, nothing else fit. I decided to just add vinyl and call it a day. (lousy job...)
(https://lh5.googleusercontent.com/-Wda478FeIoo/Uck8pVtwwBI/AAAAAAAAAcA/VHyXHLqP0is/w751-h563-no/IMG_1012.JPG)
Ordered the parts I needed and installed them:
(https://lh3.googleusercontent.com/-dx1289nM3y4/Uck8pZim1xI/AAAAAAAAAbw/NofeiKA73gY/w751-h563-no/IMG_1013.JPG)
And this is how it looked before installing the PC:
(https://lh5.googleusercontent.com/-EX_Hma0f9Gc/Uck8pTEooiI/AAAAAAAAAb4/2TmuMKblFsc/w751-h563-no/IMG_1014.JPG)
Got my hands on a old used PC for free, but no harddrive. I had an old 2,5" hdd laying around from a dead laptop, all I needed was som molex to sata cables and the installation began. I had a tough time installing windows 7. My keyboard would register keypresses so I could go to the bios, but when I had to press a key to boot from DVD nothing happened. I tried putting the hdd in another computer and installing windows 7 on it but it turned out to be a mess. Tried to install from USB but that didn't work. Finally after 4 hours of messing around I found that I had to enable additional USB options in the bios :angry: Now it worked and I installed windows 7.... only to find that there were no damn drivers to find ANYWHERE for the audio. So I formatted the hdd and installed good old Windows XP. I already had a working Hyperspin setup already setup with the games that I wanted so that was the easy part.
I drew a marquee and a control panel strip that I got printed at a print shop. Real simple stuff inspired by the Taito Vewlix artwork. glued on the artwork onto the control panel and put the sticks and buttons back in:
(https://lh3.googleusercontent.com/-XflJQyXppAI/UbRerXU76iI/AAAAAAAAAYk/kE307dTiVxc/w751-h563-no/IMG_1092.JPG)
(https://lh4.googleusercontent.com/-TP0UB0Mxuns/UbRerTNEz7I/AAAAAAAAAYo/gNkbphH97fE/w751-h563-no/IMG_1094.JPG)
Installed the pc into the cabinet with a hot glue gun. Very easy.
(https://lh4.googleusercontent.com/-aOo39Jp4Tdo/UbReta6AbAI/AAAAAAAAAZM/B0Wc_4FaLc8/w751-h563-no/IMG_1095.JPG)
(https://lh6.googleusercontent.com/-UG4iYlemQ5U/UbRetf2yJKI/AAAAAAAAAZQ/ZUqmSLYVpu8/w751-h563-no/IMG_1096.JPG)
Setup the controls to work with the frontend and tested it out:
(https://lh5.googleusercontent.com/-jx0GQUFUCK0/UbRetj387GI/AAAAAAAAAZA/_JHBNViSVKo/w751-h563-no/IMG_1097.JPG)
Installed the back panel and a small power button in the top center:
(https://lh6.googleusercontent.com/-bXI0dU8qgEM/UbReuqxtEDI/AAAAAAAAAZc/Vyye2LqTqDQ/w751-h563-no/IMG_1100.JPG)
And here's the end result:
(https://lh3.googleusercontent.com/-OA5l_t7QAw0/UbRewVrbK7I/AAAAAAAAAaI/S25l5Va-uvw/w751-h563-no/IMG_1104.JPG)
(https://lh6.googleusercontent.com/-kd3cJYB9paA/UbRexFx3rpI/AAAAAAAAAaQ/ySrgg0VxAdk/w751-h563-no/IMG_1108.JPG)
Also made a video to show it running (danish language, good luck understanding that :P )
http://youtu.be/r6u7DqvKZ1g (http://youtu.be/r6u7DqvKZ1g)
-
Very nicely done.
Control panel looks great.
-
Slick bartop !
I dig it ! Very nice color choice and matching. The marquee itself blends in well as you chose the same font for the control panel buttons !
Congrats !
-
Love the simplicity of the artwork theme on this. Look like a Japanese Viewlix cabinet.
Jigenjuke
-
Thanks for the comments :)
I went with a simple/minimalistic look as I really don't like when the artwork is too busy. Some like that with arcade characters and symbols all over the place, like the full cp and all around the screen. Not me, I like to keep it simple, and I thought the the red would go nicely with the black and white.
The machine is performing flawless and I'm enjoying it a lot. I like to play more than I like to build, so I'm glad that I got the cabinet assembled and painted for a nice low price, so I just had to finish it. It's way easier for me to just add the software than it is to do the woodworking.
-
This is how it looked like when I got it:
(https://lh3.googleusercontent.com/-Apm_EyvF5S0/UYaN8qleCYI/AAAAAAAAAS4/xJcerVZ3qyA/w640-h480-p-o/IMG_0951.JPG)[/quote]
Sp3c7r3-Did you run into problems with your adimistrator buttons hitting the plexiglass? I put my close like you did but had to re drill due to the placement.
-
No, the plexi stops just under the control panel. When looking straight down, theres actually a small gap. I also used Sanwa snap-in buttons and they barely go all the way through.
-
Had some fun with the cabinet this weekend and decided to shoot a video
http://youtu.be/iJpZkj5-oEU (http://youtu.be/iJpZkj5-oEU)