Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: Aaron McPeak on May 30, 2013, 12:48:58 pm

Title: Rowe AMI Jukebox (45's) no sound on one side and static sound
Post by: Aaron McPeak on May 30, 2013, 12:48:58 pm

I have an early 80's Rowe R-90 that (1) has no sound on one side and (2) starts off sounding good but after 10-15 plays will start to have a lot of static.  The two issues may be unrelated but they exist so thought I would disclose them.  I have seen on several other posts related to sound that you should remove and reattach all of the connectors and have done so.  Still no sound on one side.  I have pictures of the amp and related but just don't know where to start.  Any thoughts or ideas?  I can be emailed at amcpeak@yahoo.com.

Title: Re: Rowe AMI Jukebox (45's) no sound on one side and static sound
Post by: WindDrake on May 30, 2013, 04:23:09 pm

You might want to check out the KLOV forums for Juke help. There's a whole section dedicated to that, and there's some great resources over there.