Build Your Own Arcade Controls Forum

Main => Project Announcements => Topic started by: banana_bread on May 24, 2013, 02:18:51 am

Title: Banana_Bread's Bartop - In Progress and Needs Advice
Post by: banana_bread on May 24, 2013, 02:18:51 am

This is my first post and this forum has been incredibly helpful in this build. I have been working on this on and off for the past few months. This is my first bartop cabinet so a lot of trial and error was done to get to this point.

My plans moving forward are to drill in some speaker holes, mount lighting, put in a Marquee, countersink all screws and fill with bondo.

I do need some suggestions on the next steps. I'm thinking i need to do a plexiglass screen and bezel around the monitor. If anyone has any suggestions on this part please let me know!

Thanks for the great forum.
(https://googledrive.com/host/0Bxu8xZFWcMDoQlFrQXFMMzZqUUU/IMG_20130321_200152.jpg)
(https://googledrive.com/host/0Bxu8xZFWcMDoQlFrQXFMMzZqUUU/IMG_20130321_200215.jpg)
(https://googledrive.com/host/0Bxu8xZFWcMDoQlFrQXFMMzZqUUU/20130521_215507.jpg)

Title: Re: Banana_Bread's Bartop - In Progress and Needs Advice
Post by: yotsuya on May 24, 2013, 11:10:12 am

Are you planning on using t-molding? If so, round those corners off.

Title: Re: Banana_Bread's Bartop - In Progress and Needs Advice
Post by: mcseforsale on May 24, 2013, 04:19:45 pm

+1.  Also, you can countersink those joystick screws, too.  Then they'll be under your art.

AJ