Build Your Own Arcade Controls Forum

Main => Main Forum => Topic started by: CoryBee on April 13, 2013, 10:28:39 am

Title: Securing acrylic to the control panel
Post by: CoryBee on April 13, 2013, 10:28:39 am

Are the buttons enough? I put low profile screws on the corners of my 2-Player bartop builds for good measure. But is that necessary?

I ask this because I am gearing up to finish the 4-player control panel and don't want 8 screws or something on top of it.....

Title: Re: Securing acrylic to the control panel
Post by: Nephasth on April 13, 2013, 11:14:48 am

Buttons and t-molding are enough.

Title: Re: Securing acrylic to the control panel
Post by: CoryBee on April 13, 2013, 11:31:20 am

Quote from: Nephasth on April 13, 2013, 11:14:48 am

Buttons and t-molding are enough.

Thanks boss, just anal about getting dust in-between the acrylic and art.

Title: Re: Securing acrylic to the control panel
Post by: shponglefan on April 13, 2013, 12:28:29 pm

Unless the T-Molding is loose or the acrylic isn't flush with the pnael edges, dust should not be an issue.