Build Your Own Arcade Controls Forum
Main => Retail vendors => Topic started by: ebarlow99 on April 09, 2013, 12:55:03 pm
-
BARTOP ARCADE FLATPACKS 1 & 2 Player Vertical or Horizontal Screen
Sides made from 3/4 birch
All other pieces 1/2 birch
NO PARTICLE BOARD!!!!!!
Location: Oxford, MI Can be picked up locally!
Create your own Bartop arcade with this nice flatpack (you build)...come with wood only! These units are real nice and needs to be put together, sanded, primed and painted! You supply all other hardware, (buttons, joysticks, etc.)
For Vertical or Horizontal Screen placement...just need to know the time of order!!
All cabs are lasered for precise precision cuts! Can laser your name on cab!
Includes:T-molding slots, T-nuts and bolts for CP, step by step instructions!
Kit assembles in 10 minutes
All are made to order. Paypal and credit cards accepted
Control panel can be custom to your liking. Any questions just ask!! 1 Player units.....I have 2 player just ask!
Control panel cut to your liking!!!!
1 player Fits a 17" or 19" monitor either horizontal to vertical.....can be set either way!
2 player Fits a 19" widescreen monitor horizontal only
Dimensions are roughly
1 player 18.5" Width x 18" deep X 27 1/2" height
2 player 24" Width x 18" deep X 27 1/2" height
In the works....full size cabs, 2 player,pedestals and cocktail tables!!!!
1 player $175 shipped to US...will figure out shipping (NOT Included)
2 player $260 shipped to US...will figure out shipping (NOT Included)
-
I will sweeten the pot......every 5th person to order one will receive a FREE 1 player bartop flatpack shipping not included
This will be done on honor system! I am fair and honest!!!!
US or Canada only!
-
Uhmmmm. Looks killer. I'll PM you to discuss a full cab design. Since you're new, pictures may not be enough for a little while. You might want to post in some other places and talk about other things in the hobby.
-
I think I might bite...
PM sent for some more details.
-
amazing, just the design i was looking for! Wish i wasn't neck deep in bills right now, i would take the chance and buy one then vouch for you if all went well.
good luck with your sales. :)
-
thanks for the kind words!
-
can you make it wider to fit the asus 23" monitor?
I was really hoping to get one from haruman but in case he isn't taking orders any time soon, I can get one from you and start working on things :burgerking:
-
23" is really big....the cab would be too wide....the 2 player cabs are about 24 wide all together and that houses a 19" widescreen...so a 23" screen would be too big.
-
is there a price difference for local pickup?
-
sure $30 off
-
Looks nice, I am also interested, particularly if I can purchase a few blank CP boards along with the regular kit.
-
Absolutely! Whatever you need.....
-
23" is really big....the cab would be too wide....the 2 player cabs are about 24 wide all together and that houses a 19" widescreen...so a 23" screen would be too big.
You should reconsider or at least look into making another design compatible with a 23inch widescreen. There are lots of street fighter fans that use an asus 23" monitor for street fighter 4 gaming. I'm sure they would be interested in having a 2 player, 8 button bartop to play on. Maybe you can check out the shoryuken forums at http://forums.shoryuken.com/ (http://forums.shoryuken.com/) and see if there is any interest in one.
If there is a lot of interest, i would gladly accept one as a finders fee. :laugh2:
-
lol! I am actually got a prototype 2 player cab designed and cut.....right now the cab is 24" assembled and houses a 19" monitor......if I had to house a 23" monitor it would be too wide for a bartop in my opinion...but I could be wrong :o
-
lol! I am actually got a prototype 2 player cab designed and cut.....right now the cab is 24" assembled and houses a 19" monitor......if I had to house a 23" monitor it would be too wide for a bartop in my opinion...but I could be wrong :o
It's your choice really. Just suggesting where there would be some business for you, that's all.
-
I posted already....thank you! :applaud:
I will remember the "finders fee" ;)
-
http://forums.shoryuken.com (http://forums.shoryuken.com)
have to wait 6 months to post....very dumb cancelled my account :blah:
-
http://forums.shoryuken.com (http://forums.shoryuken.com)
have to wait 6 months to post....very dumb cancelled my account :blah:
well you tried.
I was just joking about the finders fee anyway. just think you have a really cool, different design and you should be able to spread the word out there.
edit: maybe it's time to think about doing something more site neutral, like your own website. Just a thought.
-
in the works! great minds think a :burgerking:like!!!
-
:burgerking:
-
Some more pics...for member Gonzojoey!!
Primed
-
Looks great, man! I can't wait to get started on this project. Thanks!
-
great work so far. i am getting ready to do the same thing after my schedule frees up a bit. you have far prices, and the laser cut is a big deal to. are you only doing pickup? or are you going to ship to?
-
thanks...it's nice having access to a laser :D
yes I ship also! can also do custom control panels (2 - 4 player w/trackball etc..)
Have 2 player cab prototype done just need to build.
Working on pedestal flat pack now! :applaud:
-
Lol. Cleaned this thread up a bit to get it back on track.
Carry on. :cheers:
-
Lol. Cleaned this thread up a bit to get it back on track.
Carry on. :cheers:
Yeah, at MY request , n00b
To recap now gone info: These kits come with horizontal or vertical bezels and can fit a probably fit a 19" horizontally. Malenko doesn't like birch for backdoors on Galaga cabs.
-
2 player flatpacks available!
-
more pics
-
more
-
Got mine in the mail! :applaud:
Talk about being well packaged! WOW.
Here are some "unboxing" pics :afro:
I should be starting this project very soon. I'll be sure to start a Project thread to track my progress.
Thanks EBarlow99!
-
A few more...
-
Awesome! glad you liked it...let me know if you need anything!!!! Can't wait to see what you do with it! ;D
-
PM'd you some questions
-
got em! :D
-
1 and 2 player cabs on the site www.xtremepinball.com (http://www.xtremepinball.com)
Look for Manufacturer "Bartop Arcades" for listings
-
NOW doing custom control panels!!! PM me for info
-
Can you cut the plexi for the CP panel too?
-
Can you cut the plexi for the CP panel too?
Absolutely!!
-
I finally assembled my cabinet and it was super easy. Actually, too easy...it only took about 15 min once I had all my tools together and my work table cleaned off. Getting ready for the build took longer than the actual build ::).
Thanks ebarlow99!
-
cool! can' t wait to see what you do with it! thanks a lot!!!! ;D
-
:lol
-
you can not link to a website that sells 60 in 1 boards.
-
really? my bad..edited
-
Just a quick plug for ebarlow99's Bartops..
Mine is coming along great and I couldn't be happier.
Here's a pic of mine so far..
Thanks man! :cheers:
-
sweet! looks good and glad you liked it! :cheers:
-
2 player cabs with red t-molding
-
1 player flatpack
-
Definitely need one of those 1-player bartops. PM Sent.
-
i got it! thanks for the order!!!
-
finished up a custom control panel with plexi for a customer last night!
-
up next for flatpacks.... Golden Tee pedestal!
-
up next for flatpacks.... Golden Tee pedestal!
Intrigued :)
-
up next for flatpacks.... Golden Tee pedestal!
Intrigued :)
me too! gonna be fun!
-
Vertical flatpacks now available!!!! inquire within :cheers:
-
picture of vertical cab...pic is a 17" can also do a 15 or 19"
-
just purchased a 4' x 8' cnc router! Time to get serious!
-
Nice, are you considering a full size, slim upright cab?
-
Yes! I will be doing full size cabs soon! Just ordered my 4' x 8' CNC router!
-
DK cab started for customer
-
Front pcs
-
2 player horizontal now in stock!!
1 player vertical or horizontal also!!!
Coming soon!
Golden Tee pedestals
Mini or full size cocktail table
Viewlix
Full size (any cab)
-
Clear!
*Thump!*
Thread restored!
-
Clear!
*Thump!*
Thread restored!
---steaming pile of meadow muffin---, what could've happened?
-
Start n ruin your own thread :angry:
Geez. Grow up
-
Your making a viewlix? Excited please take images when your done please! :applaud: Btw how much do you think it will cost.
-
Custom TMNT CP with added trackball and got rid of 3&4 player....
Matching lexan on top!
-
how much do these custom panels run?
-
depends on size and how intricate cuts are.....pm sent
-
new 2 player cab for a customer!
-
few more thing left then done!!!!
-
:applaud: :applaud:
Love the look of those Control Panels (especially the art)
Well done sir!
:cheers:
-
:applaud: :applaud:
Love the look of those Control Panels (especially the art)
Well done sir!
:cheers:
thanks a lot! came out nice! :cheers:
-
prototype done!!! flatpacks to follow :applaud:
-
prototype done!!! flatpacks to follow :applaud:
In a world where flatscreen TV's abound... ONE MAN was building Golden Tee-styled cabinets for mass consumption... /DonLafontaine
Looks sweet, dude!
-
...
-
prototype done!!! flatpacks to follow :applaud:
Lol, that's looks familiar ;) have you managed to get it up and running since you came over and collected it?
-
too much crap going on...can barely keep my head above waters
-
Full size replicas are now available!!!
-
looking good Eric.
Now if as Vendors we could all get sticky topics :applaud:
-
looking good Eric.
Now if as Vendors we could all get sticky topics :applaud:
Have you tried PMing saint or Haruman for a sticky?
-
looking good Eric.
Now if as Vendors we could all get sticky topics :applaud:
You get a sticky, you get a sticky, everybody gets a sticky! (Except for Rick, since he still doesn't have wood) ;)
-
You get a sticky, you get a sticky, everybody gets a sticky! (Except for Rick, since he still doesn't have wood) ;)
(http://2.bp.blogspot.com/_0B1U1-GFcZA/S7q1sVHUt7I/AAAAAAAAAKo/nowroS8REMU/s1600/smilingbob1x-large.jpg)
-
You get a sticky, you get a sticky, everybody gets a sticky! (Except for Rick, since he still doesn't have wood) ;)
(http://2.bp.blogspot.com/_0B1U1-GFcZA/S7q1sVHUt7I/AAAAAAAAAKo/nowroS8REMU/s1600/smilingbob1x-large.jpg)
Hey, and I didn't even have to change your post for that! >:D
-
maybe we should start Rick off with some soft wood!!! :censored:
anyone got any balsa we can send over :applaud:
-
maybe we should start Rick off with some soft wood!!! :censored: anyone got any balsa we can send over :applaud:
Ohhhhh, you guys are - so - gonna get yours.
Mongol General: Conan! What is best in life?
Conan: To crush your enemies, see them driven before you, and to hear the lamentation of their women.
(http://www.incine.fr/media/photos_films/original/Conan-Le-Destructeur_252_4ea6046134f8633bdc00320f_1320372075.jpg)
>:D
-
I'll imagine there's a sticky there for the imaginary cabs.
-
cabs for sale :P
-
still doing custom panels?
-
Are both those cabs specifically for sale? Or just an example of your kits?
-
those are sold cabs!
-
Sent you a pm.
-
got it! I love your idea let's do it!!!
-
nice work
-
nice work
thanks!!
-
finished customers cocktail table...1st one not too bad!! :applaud:
(http://i110.photobucket.com/albums/n91/ebarlow99/Cocktail%20cabinets/IMG_1655.jpg) (http://s110.photobucket.com/user/ebarlow99/media/Cocktail%20cabinets/IMG_1655.jpg.html)
(http://i110.photobucket.com/albums/n91/ebarlow99/Cocktail%20cabinets/IMG_1657.jpg) (http://s110.photobucket.com/user/ebarlow99/media/Cocktail%20cabinets/IMG_1657.jpg.html)
(http://i110.photobucket.com/albums/n91/ebarlow99/Cocktail%20cabinets/IMG_1658.jpg) (http://s110.photobucket.com/user/ebarlow99/media/Cocktail%20cabinets/IMG_1658.jpg.html)
(http://i110.photobucket.com/albums/n91/ebarlow99/Cocktail%20cabinets/IMG_1570.jpg) (http://s110.photobucket.com/user/ebarlow99/media/Cocktail%20cabinets/IMG_1570.jpg.html)
-
No price? No link to purchase? No point?
-
lol......I knew someone would bash it...... don't be mad you have no skills dude!!
-
The cabinet looks fine. I just don't understand why you're advertising things you aren't selling.
-
just giving a peek what's on the horizon! im sure if someone wanted one they would contact me
-
Jim just wants to know where the tires are so he can kick them.
-
flat as usual! :laugh:
-
Who's Jim? He sounds cool.
::)
-
Who's Jim? He sounds cool.
::)
James kthxbye.
-
New Custom Bartop Cocktail Flatpacks
Made from 5/8 Baltic birch
monitor fits up to a 19" vertical
Bezel and CPs will be cut to your liking
$185 plus shipping
US / CA only
-
finished customers cocktail table...1st one not too bad!! :applaud:
(http://i110.photobucket.com/albums/n91/ebarlow99/Cocktail%20cabinets/IMG_1655.jpg) (http://s110.photobucket.com/user/ebarlow99/media/Cocktail%20cabinets/IMG_1655.jpg.html)
(http://i110.photobucket.com/albums/n91/ebarlow99/Cocktail%20cabinets/IMG_1657.jpg) (http://s110.photobucket.com/user/ebarlow99/media/Cocktail%20cabinets/IMG_1657.jpg.html)
(http://i110.photobucket.com/albums/n91/ebarlow99/Cocktail%20cabinets/IMG_1658.jpg) (http://s110.photobucket.com/user/ebarlow99/media/Cocktail%20cabinets/IMG_1658.jpg.html)
(http://i110.photobucket.com/albums/n91/ebarlow99/Cocktail%20cabinets/IMG_1570.jpg) (http://s110.photobucket.com/user/ebarlow99/media/Cocktail%20cabinets/IMG_1570.jpg.html)
Hey Eric, can't wait to get mine. That cocktail cab reminds me of mine.
-
This is my cocktail… soon to be converted to a bar top.
-
nice Matt!!
-
New Custom Bartop Cocktail Flatpacks
Made from 5/8 Baltic birch
monitor fits up to a 19" vertical
Bezel and CPs will be cut to your liking
$185 plus shipping
US / CA only
You naming that one the Maximus Special, you are giving him cred aren't you man?
-
ahh nope......thanks dude for putting up your design so everyone can make one....
New Custom Bartop Cocktail Flatpacks
Made from 5/8 Baltic birch
monitor fits up to a 19" vertical
Bezel and CPs will be cut to your liking
$185 plus shipping
US / CA only
You naming that one the Maximus Special, you are giving him cred aren't you man?
-
Man that's cold blooded, but fair enough.
Degenatrons open sourced his bartop designs and Haruman used his design but at least gave him Cred man.
Just saying if your gonna make money off someone elses work at least give a shout out.... :dunno
-
dude........
I did not get his design from here nor another site......someone sent it to me and wanted one....so I cut one for them and they said I could keep the file....my bad!!!
Maximus THANK YOU, THANK YOU , THANK YOU if this is your design.....
FYI.....I changed the design alot to fit my needs.....
If I designed something and didn't want people to have it I would not have posted it for everyone to grab and make on there own..
so again thanks dude!
-
dude........
I did not get his design from here nor another site......someone sent it to me and wanted one....so I cut one for them and they said I could keep the file....my bad!!!
Maximus THANK YOU, THANK YOU , THANK YOU if this is your design.....
FYI.....I changed the design alot to fit my needs.....
If I designed something and didn't want people to have it I would not have posted it for everyone to grab and make on there own..
so again thanks dude!
now that you know its his design, you might wanna ask permission n stuff. Good Karma and all that jazz.
-
ah permission for what?
im not asking for anything
-
eBarlow99 and I have spoken about this, there's no problems here.
-
Well man, just do things right and in the right order.
Apparently you did get permission from Maximus, not sure prior or just now I dunno. It's just a professional sign-off.
All sellers on here get hell from someone for some reason, so its just part of it. You aren't the first that's gotten lit up over something like this, so no one was picking on you.
Its just preserving the future will for people to keep posting their plans for our use and or benefit, and you gain honesty points with your buyers.
No one wanted to mass produce these, you picked up on it, cool, i'm sure folks will appreciate it. Just let it be known the originator gave his blessing and all will be well, trust me i'd be on someone elses case had they stole something from you and tried to make money off it without your permission...
Anyhow......we are all here to help dont get so offended so easily...... :cheers:
-
still got cabs for sale :applaud:
-
I want one of those Golden Tee Pedestals. How do I get one? I got a Power Putt, Silver Strike, Bags and a 6 in 1 Jamma....nuff said.
-
New Custom Bartop Cocktail Flatpacks
Made from 5/8 Baltic birch
monitor fits up to a 19" vertical
Bezel and CPs will be cut to your liking
$185 plus shipping
US / CA only
Do you have any more pics of this unit? I'd like to see some inside pics so I can see how everything mounts.
Also, how heavy is it when it's complete?
-
Can you make it with seven buttons (Neogeo style). Ie six w/ one to the left off set?
quote author=ebarlow99 link=topic=131643.msg1424631#msg1424631 date=1393363054]
New Custom Bartop Cocktail Flatpacks
Made from 5/8 Baltic birch
monitor fits up to a 19" vertical
Bezel and CPs will be cut to your liking
$185 plus shipping
US / CA only
[/quote]
-
Eric asked me to convey his apologies - again - and is very concerned about his reputation. He didn't leave BYOAC to be shady, or any other reason other than the negativity that we all seem to get at one time or another... I, for one, have never had issue with the guy, and wish him well. I'm happy to hear that the troubles that created the necessity for this thread have been rectified.
I'm locking this thread not because Eric has done anything wrong but to keep people from wasting their time trying to contact him here instead of at one of these locations:
* His website here (http://www.bartop-arcades.com/)
* "ebarlow99 (http://bartopmania.com/index.php?t=msg&th=840&start=0&)" at Bartopmania
* "bartop-arcades (http://forums.arcade-museum.com/member.php?u=60425)" at KLOV
* "ebarlow99 (http://www.hyperspin-fe.com/forum/member.php?5133-ebarlow99&s=8ee54629636165441ab75ba7145e6cd4)" at Hyperspin forums
If he ever decides to re-join the BYOAC community, we will gladly unlock this thread for him. :cheers:
Scott