Build Your Own Arcade Controls Forum

Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: jmike on April 06, 2013, 11:29:44 am

Title: (iCade) 60-in-1 Settings issue FIXED
Post by: jmike on April 06, 2013, 11:29:44 am

Recently purchased an iCade 60-in-1 boards but I'm having trouble accessing the settings screen to set it to cocktail mode.

I hit "Test Switch" when powering on the board and get to the "screen adjust" page but I can't get to the next page. Instructions says to hit "Test" but that doesn't do anything. I've tried all Player1 and Player 2 buttons but can't seem to get to the next page.
The only button that does work is the "Test Switch" button again which sends me to the I/O page. There I can check to make sure all the inputs are working properly (and they are, even the "Test " button).
Can someone please tell me if there's a combination of buttons or maybe a Dip switch needs to be turned on so I can access the other setting pages, especially the one to convert it to Cocktail mode. This is one of the newer iCade 60-in-1 smaller boards.    :banghead:   :banghead:

Any help would be appreciated.

Thanks.

Title: Re: (iCade) 60-in-1 Settings issue
Post by: mebronx2000 on April 07, 2013, 11:24:14 pm

player 1 button number two works for me !   :cheers:

Title: Re: (iCade) 60-in-1 Settings issue
Post by: jmike on April 08, 2013, 07:26:42 pm

Thanks but I tried that and it didn't work. I recall you had issues with your 60-in-1
(Trying to get both players to play with the same controls) funny cause mine is set up that way already.
Will keep trying.

 :cheers:

Title: Re: (iCade) 60-in-1 Settings issue
Post by: mebronx2000 on April 08, 2013, 11:05:57 pm

try and go into setup on the dip switch and not using the test button  :cheers:

Title: Re: (iCade) 60-in-1 Settings issue
Post by: jmike on April 09, 2013, 09:05:13 am

Quote from: mebronx2000 on April 08, 2013, 11:05:57 pm

try and go into setup on the dip switch and not using the test button  :cheers:

Without test button? You mean I can get to the settings screen just by turning on switch 4?

 :dizzy:

Title: Re: (iCade) 60-in-1 Settings issue
Post by: yotsuya on April 09, 2013, 09:08:08 am

Yes. I'm glad mebronx told you that. I was going to ask if you were still holding those buttons at startup, but thought 'Nah, he can't be!'  :laugh:

Title: Re: (iCade) 60-in-1 Settings issue
Post by: jmike on April 09, 2013, 09:38:23 am

Quote from: yotsuya on April 09, 2013, 09:08:08 am

Yes. I'm glad mebronx told you that. I was going to ask if you were still holding those buttons at startup, but thought 'Nah, he can't be!'  :laugh:

Guilty as charged   :banghead:

Okay will try it when I get home and report back.

 :cheers: to you both

Title: Re: (iCade) 60-in-1 Settings issue
Post by: yotsuya on April 09, 2013, 09:42:54 am

jmike, do you have a copy of the manual?

Title: Re: (iCade) 60-in-1 Settings issue
Post by: jmike on April 09, 2013, 10:41:28 am

Quote from: yotsuya on April 09, 2013, 09:42:54 am

jmike, do you have a copy of the manual?

No. Just been going with what I read online.

Title: Re: (iCade) 60-in-1 Settings issue
Post by: jmike on April 10, 2013, 07:13:09 am

 :applaud: :applaud:

Finally got into the set-up screen menus. Thanks for the manual PDF Yotsuya.
Now I can start planning the cocktail build.



 :cheers: