Build Your Own Arcade Controls Forum

Software Support => Automated Projects => Topic started by: Connorsdad on March 31, 2013, 05:09:07 am

Title: Wiring limit switch to pololu 18v7
Post by: Connorsdad on March 31, 2013, 05:09:07 am

While I'm waiting for my motor to be delivered I thought I'd research how to connect the switches, motor and pololu 18v7 up.

On the following Web page at the bottom, which diagram should I follow, left or right?

http://www.pololu.com/docs/0J44/4.4

With regard to electronics I can just about wire a plug so please do advise on anything else that I need to do.

Title: Re: Wiring limit switch to pololu 18v7
Post by: Midlife on April 01, 2013, 05:24:46 pm

Follow the diagram on the left.

One switch will connect to Analog input channel 1 and Pot - and the other to Analog input channel 2 and Pot -.

Title: Re: Wiring limit switch to pololu 18v7
Post by: Connorsdad on April 01, 2013, 06:16:45 pm

Thank you :)