Build Your Own Arcade Controls Forum
Main => Main Forum => Topic started by: idsane on March 25, 2013, 01:49:15 pm
-
Hi all,
I've got a TMNT cab with four coin slots. As you can see from this pic, one of the slots has the cover missing. These red slots have a front part that snaps onto the main unit. Anyone know where to buy a matching one and also the small artwork for it. Thanks!
-
It's a coin reject button. Someone else may be able to tell you what type you have and what type you will need to get. There are a few different makers and the button themselves may not be interchangeable (or maybe they are).
You can get replacement parts through Happ Control via Divemaster127 or even print out your own labels.
-
Pg 11 of the TMNT manual (http://www.basementarcade.com/arcade/library/manuals/t/index.html) says that the coin reject button P/N is 91-1113-01.
Closest thing I found on the Happ site was 891-1113-01 (http://na.suzohapp.com/cc/42315700.htm).
(http://na.suzohapp.com/images/40/42315700.jpg)
Not sure if it is the same part. :dunno
Divemaster127 probably has them.
Scott
-
Wow, not only the perfect answer but an awesome link, thanks! Looks like that is it and contains both parts (nice image here: http://www.amusementdistributors.com/index.php?main_page=product_info&cPath=2_151_154&products_id=437 (http://www.amusementdistributors.com/index.php?main_page=product_info&cPath=2_151_154&products_id=437)). Divemaster is this site right? http://www.arcadeemulator.net/cgi-bin/shop/cp-app.cgi?usr=51F4178356&rnd=8385324&rrc=N&affl=&cip=&act=&aff=&pg=prod&ref=Reject+Button+Assembly&cat=Coin+Doors&catstr=HOME:Coin+Doors? (http://www.arcadeemulator.net/cgi-bin/shop/cp-app.cgi?usr=51F4178356&rnd=8385324&rrc=N&affl=&cip=&act=&aff=&pg=prod&ref=Reject+Button+Assembly&cat=Coin+Doors&catstr=HOME:Coin+Doors?)
The ones he has look different so I'll check to see if he can get the one I need. Thanks again!
-
That green one you linked isn't the right part -- it's a 42-0517-03 (http://na.suzohapp.com/cc/420517xx.htm).
ArcadeEmulator.net is indeed Divemaster's site.
He carries a lot of other Happ and Ultimarc parts that aren't listed.
Drop him a PM with the link and P/N from my earlier post and he'll be able to tell you if he has it on hand or if he can order it for you.
Scott
-
Just keep in mind when ordering coin reject buttons.
There are mostly two types:
One is happ and the other is coin controls.
The one you have is coin controls.
Happ sells parts for both
But definitely try to go through divemaster instead it'll be cheaper
-
One is happ and the other is coin controls.
The one you have is coin controls.
+1
Yup, that's a Coin Controls brand. I have the same ones.
DeLuSioNaL29
-
Yep they are definitely coin control doors. Thanks everyone I think the 891-1113-01 is correct. I sent a message to divemaster to see if he has them or can get them. Thanks!
-
If by chance he doesn't have them, you can get them at Twisted Quarter
-
Thanks for the tip. I think twisted quarter will be the way to go as they have this part and the cup holders I want on their ebay store. I never heard back from the arcade emu store. Ordering tonight!
-
I have always had good results with twisted quarter
-
Yep I already got a response to the joystick question I asked last night too, seems like a winner!
-
Got all my parts from twisted quarter shipped incredibly fast at good prices. Time to install!
-
Glad to hear it worked out well.
I have read on the forums where some have had issues with Twisted Quarter but I have always got my orders fine
-
If no one else had it, I'd suspect Bob Roberts might.