The NEW Build Your Own Arcade Controls

Front End Support => MaLa Frontend => Topic started by: colonelsnow on March 14, 2013, 09:27:38 am

Title: Question about Player 1 Start plus Player 2 start to exit Mala
Post by: colonelsnow on March 14, 2013, 09:27:38 am

I thought that Mala came with the default exit of Player 1 + Player 2 , however that is not working for me. I am using a jpac. Do I need to be using something like autohotkey for this button combination to work or is their another way?

Title: Re: Question about Player 1 Start plus Player 2 start to exit Mala
Post by: dgame on March 14, 2013, 10:00:17 am

If I recall correctly Player 1 + Player 2 on the  Jpac sends the  "Esc" (Escape) key. So set the Escape key to exit in Mala and it should work.

Title: Re: Question about Player 1 Start plus Player 2 start to exit Mala
Post by: colonelsnow on March 14, 2013, 12:24:06 pm

Quote from: dgame on March 14, 2013, 10:00:17 am

If I recall correctly Player 1 + Player 2 on the  Jpac sends the  "Esc" (Escape) key. So set the Escape key to exit in Mala and it should work.

Do you know if this is true even if the Jpac is connected only through the jamma connector rather than being wired through he individual input terminals on the Jpac?

Title: Re: Question about Player 1 Start plus Player 2 start to exit Mala
Post by: dgame on March 14, 2013, 12:38:43 pm

The keys should behave the same.

To test for the escape key open Notepad and drop down the File menu.

Pressing Escape will close the menu.