Build Your Own Arcade Controls Forum

Main => Audio/Jukebox/MP3 Forum => Topic started by: rpucci on March 05, 2013, 07:48:39 pm

Title: LED Display On A WRD Wallbox
Post by: rpucci on March 05, 2013, 07:48:39 pm

Hi

I have several burn't out segments on my WRD Wallbox LED'S display and I was wondering what's the correct LED'S replacements number is,or where I can purchase them.Thanks

Bob

Title: Re: LED Display On A WRD Wallbox
Post by: ami-man on March 06, 2013, 05:19:24 am

Hello Bob,

This wallbox is like a chapter of "War & Peace".

Have you checked for dry joints on the selector logic board? If not check this first. Yes the LED displays can go faulty, I have never managed to find replacements with the same pin outs here in the UK, you may be better at getting a new replacement in the USA.

The other alternative is to buy a display off of any jukebox from a R-80s up to R-83 including the RI-2 and CTI-1SC and using the display chips in your wall box.

Regards
Alan

Alan Hood
ami-man
UK

Title: Re: LED Display On A WRD Wallbox
Post by: rpucci on March 07, 2013, 05:52:27 am

Thanks Alan

Bob