Build Your Own Arcade Controls Forum
Arcade Collecting => Miscellaneous Arcade Talk => Topic started by: mebronx2000 on February 18, 2013, 08:52:42 pm
-
i have a pac man upright with one joystick and 3 action buttons and a one and two player start button ... i hooked up me jamma button to the one player controls and i wired the player 2 button to the player 2 start on the jamma harness and i have me board set for 1player upright how do i get it to play 2 players alternating with the one joystick ? thanks :banghead: :notworthy:
-
anyone please :banghead: :cry: :badmood: :badmood: :badmood: :dunno
-
I'm not sure I understand the question -- pretty much all of the games on there are alternating single stick games. Do you have it set for cocktail mode perhaps ?
-
I'm not sure I understand the question -- pretty much all of the games on there are alternating single stick games. Do you have it set for cocktail mode perhaps ?
i have it set on upright 1... on the jamma harness it has 1 player hookup wires and a 2player wires so on my joystick i have the one player start hooked to the 1player start on the jamma harness and the 2player start hooked to the 2player start on my jamma harness ..but i cant play 2 players ? thanks :notworthy:
-
..but i cant play 2 players
Are you saying inserting 2 credits and pressing player 2 start doesn't start a 2 player game? Or a 2 player game will start but the joystick and buttons don't work for player 2?
If it can start a 2 player game, just wire up the controls to BOTH the player 1 pins and player 2 pins of the jamma connector.
-
..but i cant play 2 players
Are you saying inserting 2 credits and pressing player 2 start doesn't start a 2 player game? Or a 2 player game will start but the joystick and buttons don't work for player 2?
If it can start a 2 player game, just wire up the controls to BOTH the player 1 pins and player 2 pins of the jamma connector.
i have it set for free play ..and i am saying hitting the player 2 button does nothing it doesnt start a two player game thanks
-
Double check your wiring for proper crimps and connections and also possible opens (both in the signal wire and your ground circuit). Verify the signal wire is connected to the NO terminal of the microswitch and also verify you have continuity across the switch's ground pin and NO pin when the switch is made. Also, I've come across quick disconnect terminals that need to be pinched a little to make a proper connection with the switch spade, make sure yours isn't loose.
-
Double check your wiring for proper crimps and connections and also possible opens (both in the signal wire and your ground circuit). Verify the signal wire is connected to the NO terminal of the microswitch and also verify you have continuity across the switch's ground pin and NO pin when the switch is made. Also, I've come across quick disconnect terminals that need to be pinched a little to make a proper connection with the switch spade, make sure yours isn't loose.
thanks i will give those a try thank you for your help ! :notworthy:
-
I don't think Free Play lets you play 2 player on the 60-in-1.
-
I don't think Free Play lets you play 2 player on the 60-in-1.
mines set on freeplay, no issues with 2 Player games.
-
I don't think Free Play lets you play 2 player on the 60-in-1.
mines set on freeplay, no issues with 2 Player games.
but do you have your 60 in 1 jamma board set for upright 1 control or upright 2 control thanks so much
-
the only dip thats on is the one that sets it to use 15Hz.
-
the only dip thats on is the one that sets it to use 15Hz.
i am not talking about dip switches i am talking about the setting !! :banghead:
-
the only dip thats on is the one that sets it to use 15Hz.
i am not talking about dip switches i am talking about the setting !! :banghead:
I'll check tomorrow, Im 99% sure its set for 1player upright in fact 99.9%
-
thanks for all your help guys ! :applaud: :notworthy: :cheers: