Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: cbnaylor on February 11, 2013, 02:11:26 pm

Title: HELP
Post by: cbnaylor on February 11, 2013, 02:11:26 pm

Ok Arcade Junkies!

I need help with two arcade monitors that I currently have.  I have one monitor that needs the flyback replaced.  It's an RCA Monitor but I know you guys really don't care about that.  I need help identify what kind flyback I need.

As for the second monitor, I need to replace the cap kits but need help identify this as well.  On the Chassis, it's listed as an P538.  Which by looking at over the forum, that just tells it's an 25 inch monitor correct?  Anyways, I've taken pictures of both chassis and will share.  Thanks again guys for your help.  By the way, I've already checked Bob Roberts images but I really don't know what I'm looking for.  They all look the same to me.

Thanks

Title: Re: HELP
Post by: cbnaylor on February 11, 2013, 02:40:47 pm

This is a picture of the Chassis with the flyback problem.  If you need another photo, please let me know.  Thanks for looking at this post.

Title: Re: HELP
Post by: cbnaylor on February 11, 2013, 02:43:15 pm

The next picture is a picture of the Chassis P538 that needs a cap kit. 

Thanks

Title: Re: HELP
Post by: grantspain on February 11, 2013, 05:16:42 pm

the flyback chassis is a hantarex polo 1-if its 25" and standard 15khz chassis then you need hr7191 flyback

the capacitor chassis  is a k7000 series

Title: Re: HELP
Post by: cbnaylor on February 11, 2013, 07:40:04 pm

The flyback chassis has a 25inch monitor so according to your post, it looks like it will be the second option. Correct?  Thanks so much for your expertise.