Build Your Own Arcade Controls Forum

Main => Monitor/Video Forum => Topic started by: mrcram on February 08, 2013, 01:22:13 am

Title: MAKVISION 4827F1 stuck on disconnect when plugged in
Post by: mrcram on February 08, 2013, 01:22:13 am

I have a Makvision 4827F1 vga monitor that appears great and is working.  I think it is a 29inch monitor. It should be high res and able to take a 640x480 60hz input from my computer to its vga input.  No matter what, it still reads the disconnect screen saver on the display. 

I am running a Visiontek HD4350 though DVI to VGA output with dongle but have tried other settings also.  Any ideas?  The internet is blank when searching for the 4827F1 monitor.

(https://lh6.googleusercontent.com/-WQTmYglNBXA/URSZA2V-PyI/AAAAAAAAAco/vNhEQsK9cPM/s512/IMAG0224.jpg)(https://lh6.googleusercontent.com/-WYL33ugzpRA/URSY-9HO_vI/AAAAAAAAAcg/Tr4vlalflDg/s512/IMAG0227.jpg)

Title: Re: MAKVISION 4827F1 stuck on disconnect when plugged in
Post by: mrcram on February 10, 2013, 02:07:23 pm

So from researching, this monitor is only high res, no 15khz or anything.  It seems that there are people that have got it working with arcadevga3000 but had to use a vga/dvi adaptor on it.  There has to be some sort of setting I can use on my hd 4350!