Build Your Own Arcade Controls Forum
Main => Audio/Jukebox/MP3 Forum => Topic started by: jdemarti on January 25, 2013, 06:04:28 pm
-
Is anyone familiar with the amplifier accessory board for Rowe Amplifiers? I am trying to hook mine up to my CD100 amplifier so I can pay background music through my ipod. I believe I have it connected the right way to the rowe amp, and I hooked my ipod to the BGM ports. I am not hearing any music through the amp. The board's line level is all the way up and the volume is up on the ipod. I suspect the amp mute signal is keeping the BGM from working, but I thought the mute control would be taken care of in the accessory board. I attached a pic of the board. Any suggestions? Is it compatible with the cd100 amps?
Thanks
-
Here's the manual for the kit:
http://arcarc.xmission.com/PDF_Jukebox/Rowe_AMI/Rowe_Amplifier_Accessory_Board_Kit_26694703_%28Rev_3-93%29.pdf (http://arcarc.xmission.com/PDF_Jukebox/Rowe_AMI/Rowe_Amplifier_Accessory_Board_Kit_26694703_%28Rev_3-93%29.pdf)
-
Thanks Ken.
I have a copy of the manual and followed the installation instructions for the BGM feature. However, I still cannot get it working correctly. I even tried a second board just in case there was a problem with the first one. Not sure what I am doing wrong.
-
Ok, I finally got it working. The problem was I didn't have the microphone interconnect cable hooked up to the amp. I didn't think it was needed unless a microphone was going to be used. Apparently, the interconnect hookup is required even for the BGM and axillary connection. Works great.